How To Replace Interior Door Handle 2006-12 Ford Fusion

Buy Now!

Interior door handles can take a lot of abuse over the years being pulled on to open and shut doors, or banged up if you load things in and out of your vehicle frequently. In which case, you may have trouble getting in and out of the vehicle! This video shows you how to install a new interior door handle in your 2006-12 Ford Fusion.

This process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion

Tools you will need:
• Pocket Screwdriver
• Socket Driver

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[carolynjohnsondike]

Thanks so much. The mechanic was going to charge me $290.00 to replace my driver side door handle. Thanks to you and your video I was able to do it myself for less than $100.00 including the parts and tools. Next time it will cost me even less because I already have the tools. No more rolling down the window and opening the door from the outside. 😂 Keep up the good work.

[hjcK]

Man made the video dumb dumb proof but still under 6 minutes. Thanks bro! Saved $250!

[gillianfilyaw]

I have to undo my door pannel to figure out why it doesn't open from the inside. This will help a lot! Thank you!

[RacerX-sikj]

Thank You! I'm lousy at auto repair but just followed step by step, saved a ton of money. This would be a perfect presentation if he only mentioned the tool sizes... So instead of, 'remove this bolt, ' He should say, 'remove this 5/16ths bolt, ' etc etc...

[larrykelly]

This is the best video I have seen and used on the internet for a very long time. The young man was articulate in his presentation. It saved me a bunch of money by following his instructions.

[matthewsoto]

Had a shop replace a door handle a few years ago and he charged more than $100. Both driver and passenger handles were broken recently and I watched this video. Perfect tutorial on how to change them. Highly recommend to check it out and buy the handles yourself.

[mrh]

I used your video to replace my inside door handle in 08 Ford Fusion. Great Job!! Your instruction was so confidently spoken to ensure me (a klutz) I could do it. I did and Thank you for ALL your video's.

[stevenbrown]

Thank you for the straight forward and to the point information. 👍 Well done.

[starbuc]

Thanks! I appreciate the short, focused video with good editing. You saved me some money!

[VBmom-mbqu]

Thank you! I'm a mom in my 60's and did this by myself!! Good video

[AthenaKSJW]

Thank you! Took me less than an hour to do this. I managed to get by with just a small flat head screw driver since I didn’t have any wedge tools and a socket kit (no power tools).

[sandygroger]

Thank you so much for this easy to follow video. Less than an hour of our time, and the hardest part was trying to open the new ratchet set we bought.

[godfather]

PERFECT! Car Shop wanted $499 for this repair! Thank you!

[timwhitcomb]

Thank you so much for putting out these great

[josephgasslerjr]

This video is great! Easy to follow, great audio of video. Instructions are fool proof. Life Saver!

[timbouthner]

Great video. Installed new handle in roughly 20 minutes. Works great.

[drewg]

Thanks
Rarely do you see a video that looks this easy...and it turns out that it is this easy!
Great instruction and step by step detail.
Took me about an hour and saved me a fortune! Awesome!

[chrisclark]

Thanks for this video. Walked me thru the whole thing.

[christopherschadt]

Thank you! Very helpful. Gave me confidence I could do myself, the info to get it done easily, and probably saved me a couple hundred bucks!