Running Cable Into Your Home - Cell Phone Signal Booster Home Install Series (3 of 6) | weBoost

This is part 3 of how to install a cell phone signal booster in your home. In this series of videos we'll walk you through the entire process of how to install a cellular signal booster in your home. We'll cover the initial assessment and setup, where to install each component, best practices and troubleshooting.

In this video we'll cover how to run cable into your home. There are a number of ways to do this. Through a vent, under a flashing or penetrating the structure by drilling a hole. We'll cover all of the ways to do this as well as some tips and tricks we recommend.

All of our signal booster kits come with plenty of RG-6 cable to connect all of your components as well as a barrel connector to connect two pieces together if you need a longer length.

Here are some links to the other sections of this series:
Step 1 - Locating where to Install Your Signal Booster

Step 2 - Installing the Outside Antenna

Step 3 - Running Cable into your Home

Step 4 - Installing the Inside Antenna

Step 5 - Installing the cell phone signal booster

Step 6 - Checking your signal and Troubleshooting

[wmo]

These are very helpful! Thank YOu! I have a question, I'm wondering if you can help. On our new house build - with several outside buildings, shops etc... I ran CAT5e in conduit underground to each of these buildings. Is there a product/way to use this cable instead of the coax? Is there a 'converter' of some kind out there? THANKS!

[KYTVIDEO]

How can I get the coax over the gutter?

[ESCFanCH]

all of the tools and equipment and the fact that I don't own a ladder to get onto my roof.... there has to be an easier way. I already sent my signal booster back after I opened the box and was overwhelmed. Going through your other videos... so many other tools so many other pieces of equipment... like... why can't the cell phone companies just put up another tower? geez.