More Volume For Your Broadcast Mix On Behringer X32, M32, XR, Wing - #AscensionTechTuesday - EP106

More Volume For Your Broadcast Mix On a Behringer X32, Midas M32, Behringer XR, or Wing Console - #AscensionTechTuesday - EP106

The X32's Precision Limiter is a powerful tool for squeezing extra volume out of your church's livestream broadcast. This week, Chad shows us how to set it up with audio examples.

You can make suggestions for the latest #AscensionTechTuesday episodes at:

Don't forget to LIKE, SUBSCRIBE, and to SHARE!

[DevonBretey]

I don't usually comment on YouTube videos. But I have found your recent videos on broadcast mixing super helpful. Thanks.

[stafftru]

You never disappoint! I've learned so much from watching and applying what you teach in your videos. Keep it up!

[isettech]

When you do that for the mix, and push compression, the peaks of the kick and snare will suddenly start to mute the vocals. For broadcast, you want to limit or compress the kick and snare on the input side, That way they do not pump the vocals, which can be brought up in the mix.

[lostinAR]

Thanks for another great tutorial. One follow up question on the limiter settings. What does "squeeze" do and how should I set it? (I guess that's two questions).

[JohnnySutherland]

Excellent. Very helpful. Very well explained. Thank you for taking the time to make this video.

[troyboy]

Thanks for sharing your knowledge, I will be watching all of your videos very soon. Our church just purchased a Behringer X32, coming from a Allen & Heath analog console there is a lot to learn and I will be setting it up this evening. God Blessings to you.

[obidavekenobe]

Great explanation of the difference between a compressor and limiter 😁

[jasonphillipsvideos]

Thank you! This is a great resource! You mentioned a link to a separate video towards the end of this about the back end of this topic. I didn't see the link anywhere. I'm assuming that the Dynamic Compressor and the Precision Limiter will be set to POST fader? Thanks again!

[tubetone]

Excellent tutorial! Could you provide ballpark settings on the Percision Limiter for podcasting or VO? Thanks.

[benjdave]

Hi Chad...do I need to be post fader or prefader on FX and BUS SENDS for this set-up??? Thanks🙏🙏🙏

[dwayneaasberg]

Hey Chad. Two questions.
1. What does Squeeze do? What should I listen for in adjusting Squeeze?
2. You've set this up to get good strong signal during music. What do you do during the spoken bits like readings and message?
Thx. D.

[benjdave]

Hi Chad...do you mean to turn off compression and let the precision limite do the job? Thanks

[TimmyP]

Have you tried the Combinator? The attack and release can be very quick if desired.

[fvvideo]

Clearer understanding of this limiter. What will squeeze parameter do and did you intend for us to hear final treatment with release all the way down. Thanks

[ginasandoval]

Hello…we just got our Mixer not too long ago…our audio voice output is very low…
I noticed you have 2 channels for the broadcasting…can you please let me know how do I set that up? And then step by step to higher our output please… thank you

[mdcoker]

Thank you so much for this tutorial. God Bless you. i am currently using matrix for live stream and it is mono, is it possible to apply precision limiter on that channel. Thank you

[andym]

just tried on voc alone and amizing tell me what u think and what is the auto gain

[geol.tobiasadero]

Am using a X32 boards and am using busses for my Livestream. Here is the problem my keyboards are plugged into the auxiliary in while all the vocals are in the line input. When the vocals are on especially on the Livestream you hardly here they keyboards unless the vocals are low

[auggment]

Great stuff been frustrated because our audio isn’t as loud as this can be and could not fix it

[BenjoNadarajah]

Hi,
Thanks for your helpful videos.
I have noticed after I updated the latest firmware (4.04.1) on the X32, the fader db level is showing incorrectly. Say for example, if I set Channel 1 fader at 0 db, the LCD display shows that it is +4db on the Main tab. All the fader are showing like that. Is this a firmware issue or may be my console needs repair. It is surprising that all faders are like that. Could you please check your console and let me know