How to Clear a Bowden Tube & Nozzle Clog, on a Creality Ender 3D Printer

@Creality3D 3D Printer Clogged? Won't Print? Not sure why? Your BOWDEN TUBE, NOZZLE, or BOTH, are clogged.

@GreggAdventure will show you how to clear it!

(or search "3D Rundown, on Udemy)

Support this Channel, and help ensure it's continued existence:

If you buy Sovol/Sunlu Stuff, from the Sovol/Sunlu shop, use my link:

Have I helped you? Consider a TIP:

Upgrade your Printer:

Support this Channel: Use my link, when shopping:

(or search "3D Rundown, on Udemy)

#3dprinting #ender3s1 #creality

[Kgotso_Koete]

Thank you so much this made my Sunday. I followed your instructions and my 3D printer is working great again.

[deadlyfehr]

I will have to try this tomorrow but you may have saved me a ton of stress!

[bobbyhernandez]

Thank you so much worked like a charm.

[Kingofcrazieness]

Thx sooo much, I have been troubleshooting this for months

[michaelcole]

This has been super helpful -- thanks for this video!

[plaga]

Thanks dude, worked great on my cr6 se

[Theguys]

If you have a nozzle cleaning wand (I’m not sure what the exact name is but it is .4 mm thick ) would that have fixed the nozzle so you didn’t have to toss it?

[GERG]

My filament is broken in the tube so i cant get to it, and the tube is stuck to the hotend and I take rake it off, I'm not sure what I can do

[anxiouscreatorstudios]

How do I clear the tube if the filament broke off and there's noting to grab onto to pull it out?

[TheeAbstractHero]

I keep having issues where the filament will back up into the bowden tube coupler and solidify there. Been through a few of those couplers as of late. Cheap part, sucks it costs more to ship the damn fitting than its worth.

[nomadlad]

what do you do if you have filament stuck inside the bowdem tube???

[bamabassgrabber]

Ive pulled on mine as hard as i could and cant get it out 😭 i was afraid i was bending stuff! Mine is a Anycubic Kobra Go

[jessikathompson]

Worth noting - please don’t grab a hot nozzle! There should probably be an edit that the nozzle should no longer be hot before that final step.

[Xyrer]

Mine gets clogged every print. It doesn't stay that way, I purge some filament, begin printing just fine, and then it clogs and the filament gets cut at the extruder

[sgtjetson]

what does it mean when every time you shove your Bowden tube all the way down it melts and clogs but if I pull it back a 1/4 it doesn't melt. WIth that, it will still have a feeding issue and clog between the tube and nozzle.

[MrStyrex]

hey! i did everything and it sadly did not work can you help?

[THRobinson]

Make sure the nozzle is hot... May want to add "make sure it's cold" for the last few steps else someone might get burnt.

[smashingpencils]

When I pushed the Bowden tube in a far as it could go, it melted and came out of the extruder….now the tube in tiny because I didn’t realise until it was too late. How do you know when to stop pushing?