Easy Bambu A1 Nozzle Swap

$50 OFF Coupon: TIER50
$10 OFF Coupon: ESE10

Music:
"Walkman FM" by Lupus Nocte

⚙The gear I use: [Affiliate Links]

#3dprinting #shorts #bambulab

[JJShankles]

Guess how small of a Benchy it will make?

[theaces]

That's such a clean nozzle swap that's not even fair 😭

[fuzzydragoncosplay]

I love how easy the nozzles swap out on the A1 series printers, so much easier than any other printers I've used, including the P1S

[doubleayy]

Forgot to mention you also need to change the nozzle in the printers' software or it will not accept/ print 0.2mm prints

[nerol]

No way. I can't believe in this nozzle swap that so easy!

[coalachaos]

Did the same. I have made a benchy with 22% of the original size- the bottom text was still fine. Its insane.

[coinopanimator]

Is it alright to leave the filament in the nozzle when storing it?

[cgwworldministries]

What I love about Bambu is they're cheap enough to run a print farm.

[ssmodest]

Пока удобнее и быстрее чем на adventurer 5m я не встречал. Даже замена на видео выглядит долгой)

[fricken]

It’s a great nozzle but mine badly clogged after 8 prints. Haven’t been able to unclog it 😅

[JonFawkes]

God I wanna get one of these so badly. I got a resin printer 'cause I wanted that fine detail, but resin printing is so much trouble (not to mention the hazardous materials and safety equipment). I've seen pictures of prints with 0.2mm nozzle and the quality seems comparable to resin (especially my super old Anycubic Mega)

[UnityDPrintLabs-hiof]

Heard about the recall
But curious to see how to clear a clog since it's so easy to swap or I mean just buy a new nozzle every time you have a issue right $$$$

[rallywagon]

Heeeyyy. I recognize gridfinity when I see it.

[Joedex]

do you have to change any settings? should I change in the slicer?

It's so easy! But what do you do with the little filament that stays in the nozzler you just took out? Cut it, leave it as is? I just swapped the nozzle for the first time and I'm kinda unsure

[wadewilson]

you can also make large prints more detailed

[thanatosor]

How much smoother would it be when printing ?

[FKA_Mega]

Instructions unclear: I restarted the Soviet Union

[blastbuilder]

I suspect your machine is brand new. There's usually a bit plastic stick to the surface that makes it hard to take off when cold.

[hampuswahlgren]

More of a hotend swap than a nozzle swap tho?