DTW285 Makita Fake Vs Original

[jtbtabimono]

Loving the fake one says '118v' on the battery LOL!!

[jamnassjn]

1:57 adjusted makita speed to the max, while the fake one was on lowest sapeed . i have fake makita it does all the job

[davidbernal]

La replica sirve para atornillador de estructura de cielorasos ???

[executor]

It's already loosen by the first one that's why it's easy for the second one. Plus the first tool was at low speed, and the second at high speed not fair.

[gmvjphe]

Непонятно с настройками, на копии стоят самая малая скорость а какую поставили на оригинале не показали

[iQnetit]

The real makia chooses the highest level and the fake makia chooses the lowest level, it's not fair. Although I don't have to defend the fake makita.

[jasonhull]

Just look at the one with BL on the back of the impacts. The BL is brushless and the fake impact is unmarked without BL on the side.

[korstk]

You need to use the same makita battery for both in this test for achieve fair result.

[Shant]

Очень бы хотелось узнать где можно приобрести такие шильдики а-ля Макита?..

[eesauss]

These wrenches can’t unscrew if it was tightened by a stronger wrench as a pneumatic one. Unfortunately it’s very common. The right procedure would be to use a torque wrench.

[johnwade]

The fake looks like it's come off the same tools. I wonder if the factory is running an extra shift.

[martinwinlow]

Why do you keep starting the same nut with the fake driver? A better comparison would be to start half the nuts with the fake and half with the Makita then you wouldn't have the possibility that the fake one was doing the difficult bit of breaking the 'seal' as it were...

[MrEnginman]

Это обман. Репликой он на первой скорости пытался открутить, а не с максимальным моментом

[Gleb_Panfilov]

Чувак реально за идиотов всех решил подержать... сначала ослабил гайки а после решил чешуей блеснуть типа макита лучше.. а что же на не ослабленных гайках то не показал.... В реале кроме понтов и цены никакой разницы нет и быть не может.... копия откручивает любые гайки на легковой машине включая ступичную. так что впарить туфту как то не получилось...

[marekhlavaty]

First machine on 1st gear, second is on 4th. I have not original and its good. You have 4 gears

[senol_ozen]

If you try it at the 1st setting, of course it won't disassemble, you haven't set the machine to the last setting. It is clearly evident in the video.

[Meraut]

Lmao, the fake one looks like it’s shaking itself apart

[jxsh]

How do you get that makita badge for it 🤣

[VoornmAchternm]

battery problem...not machine..

you must sam battery
not2 batterie different

[OsiZ]

The first one has 170nm and the second 330nm both look real