How to Change Oil 08-12 Ford Escape

In the video, 1A Auto shows how to change engine oil. The video is applicable to the 05, 06, 07, 08, 09, 10, 11, 12, Ford Escape.

🔧 List of tools used:

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[AAuto]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[boomerguy]

Regarding how much to tighten the oil sump pan drain bolt, I have had bad experiences with this type from previous owners who stripped the threads. I use a soft crush washer made of aluminum or copper and tighten the bolt just until it starts to crush. This prevents stripping the threads in the aluminum sump and guarantees a good seal. I've been using this procedure since the 1980's with no problems at all.

You can find the crush washers online at a low price per bag. Just be sure to get the correct ID and OD. I always put a new crush washer back on after each drain. Cheap insurance.

[jigglypuff]

I did my research for the amount I'd need n bought everything but I didn't know how to do it lol. I learned everything i needed to know thru ur video. Thx a bunch 😊😊👍

[ZsebastianZ]

For anyone wanting to do their own oil change. Just fill up your sealed oil filter with oil so that its not dry when you start the car. And youre better off wiping away oil from your engine with a rag than spraying break clean on it and not wiping off the excess, break cleaner does damage to rubber material.

[travisgrindal]

At 1:31, the exhaust pipe was magically removed making it super easy to access the oil filter. Good luck to "normal" people for removing that section. Most DIY'ers will be reaching around the exhaust pipe.

[luckystar]

Well, this video has me much less nervous. I don't have a lift but I have jacks and chocks. Here's hoping that part goes well so I can change my oil (1st time on my own)

[boomerguy]

The Ford Escape Gen 2 body started in 2008 but the Gen 1 engines and transmissions continued into the 2008 model year, making it an oddball car. I have one and love it. I prefer the more rectangular Gen 2 body with the simplicity of the Gen 1 engine and transmission. I'm not sure why Ford did this, but it works for me.

[Mihalyofficial]

You should add oil to the filter to reduce engine wear. Also engine should be warm before draining and dont add oil to the max with a cold engine as heat will make it expand more.

[moralesruben]

can you tell me where or what is the belt tensioner of this vehicle ford escape 2010 2.5 L 4 please friend thanks and good video excellent work

[Mark-qwrg]

What is the recommended torque spec for the drain plug?

[todd_r.]

How many quarts does this take? I bought a used 2012 and it had no owners manual

[moneycryptocurrency]

Thank you for such an informative video.

[sbrinkerhoff]

2010 manual says use motorcraft synthetic blend can I use full synthetic

[kinezo]

You forgot to reset the oil change reminder.

[xx__birdman__xx]

They forgot to show the part when they stopped recording where they tighten it with an impact so you no choice but to come back

[siemdebesay]

I have the same car. 2010 v6 escape. If I use full synthetic oil and a good synthetic filter. Under normal usage no towing or long idling just regular highway commutes to work. How soon should I change my oil??

[midknight_flight]

Tried turning the drain plug but it looks like the last person to do my oil tightened it too much. Guess I’ll have to pay someone to do it this time

[comradecarlos]

The hardest part of changing the oil for me is getting that god damn drain plug out.

[derekjp]

Yeah, couldn't find it after watching this. Maybe this comment will still help your algo

[willemprinsloodesign]

Can I use 5W40 for my Ford Escape 2.3L XLT 2010 model?