filmov
tv
3D Printer Problems: PLA Part Warping - guide - HOW TO SOLVE IT! (TronXY X1)
Показать описание
3D printer part warping is a problem. This video guide is the solution for 3D printing PLA parts in my case, on my TronXY X1.
When I made this video I didn't know whether it was the hot enclosure or the blue tape, or both which solved the problem.
But now I know that it was the tape.
So - painter's tape (known as "masking tape" in the UK) is the way to go.
I'd read about it but dismissed it because the sticky side was down, and I couldn't see how it would work. Well, it works.
The only down-side is that part printed on this tape received a mat finish. Apparently, you can fix that by polishing the tape with a solvent, but I have not so far seen that succeed. Still - it's an excellent solution to PLA part warping for me.
MUSIC:
When I made this video I didn't know whether it was the hot enclosure or the blue tape, or both which solved the problem.
But now I know that it was the tape.
So - painter's tape (known as "masking tape" in the UK) is the way to go.
I'd read about it but dismissed it because the sticky side was down, and I couldn't see how it would work. Well, it works.
The only down-side is that part printed on this tape received a mat finish. Apparently, you can fix that by polishing the tape with a solvent, but I have not so far seen that succeed. Still - it's an excellent solution to PLA part warping for me.
MUSIC:
3D Printer Problems: PLA Part Warping - guide - HOW TO SOLVE IT! (TronXY X1)
0:20:04
Have your 3D Prints started to suck? Watch this!
0:06:41
3D Print Not Sticking? 9 Ways to Get Perfect Bed Adhesion
0:04:47
Better First Layer and Bed Level Fixes on 3D Printers
0:01:38
Understand WHY 3D prints WARP - Simple explanation with experiment!
0:05:40
Fix Bad 3D Prints on a Creality Printers
0:14:04
Troubleshooting 3D Printer Issues | 10+ Common Problems 3D Printing Beginners Have!
0:04:26
Tips for 3D Printer Bed Adhesion | 5 Tips in 5 Minutes
0:04:11
3D Printing Troubleshooting Guide: Part Not Extruding
0:02:44
5 must-know 3D printing tips & tricks. (stronger and better looking prints)
0:00:59
Problem Solved Why The Keeps PLA breaking 3D Printing
0:08:27
3D Printer Blobs: a mysterious problem you won't guess how to fix 🤔
0:05:05
3D Printing Troubleshooting Guide: Layer Separation
0:12:23
How a 3DBenchy can tell where your 3D prints need improvement
0:03:10
POCKMARKS - how to get rid of gaps in 3D prints
0:16:11
MUCH STRONGER 3D prints due to LESS COOLING! Testing PLA & PETG
0:14:10
Are you printing at the right temperature?
0:03:19
Extrusion problems
0:13:48
PLA - 3D Printing's Biggest Lie.
0:18:15
STRONG 3D PRINTED PETG FILAMENT PARTS Solved my problem with weak PLA parts.
0:06:14
What causes lines in the middle of a 3d print? Solve under extrusion problems mid print, halfway up!
0:20:32
Fixing Under Extrusion in a 3D Printer
0:08:50
Understand and stop warping on FDM 3d printers such as Ender or Prusa
0:17:27
The Ultimate Guide to Perfect 3D Prints
Комментарии