Troubleshooting 3D Printer Issues

Should you wish to support me, you can also do so via:

Want to send me something? go ahead (Normal mail as courier packages get returned):

Attn: Joseph Casha
P.O. Box 12
Constitution Street,
Mosta, MST 9059
Malta
Europe

Licensing Agreement 2.0 (READ)

-----------

✌✌If you wish to support the channel, you can do so by checking the below links, it's won't cost you anything extra, but the channel will recieve a kickback which goes a very long way ✌✌

Recording Equipment:

[ItsMykro]

5 Years Later and your video is still teaching people. Thanks for this!!!

[DanielRut]

Please continue the series, its a good way to set a standard for community support!

[peter.stimpel]

I really like the idea. Some 3D printing groups are kind of ugly to people asking more or less beginners questions. They forget that everyone was starting at a given time. And they forget as well, that not everyone wants to become a nerd or pro on 3d printing. For your question if this is helpful: of course it is, as well as your offer to post issues on your facebook page. I really appreciate the mix of addressing different levels of users by your channel. Can't wait for more of such stuff.

[spikekent]

You're so right Joe. There are so many trolls that ridicule people for not knowing something, furthermore, the trolls don't know either.

[Soumein]

"Huh, that's not a bad drawing."
"Oh, you can't see it."

pats shoulder

[josephspina]

THANK YOU! I've been trying to troubleshoot my CR-10s Pro for weeks now, and yours is the first video I found that made me feel like I understood what I was seeing, and helped me troubleshoot it without resorting to buying custom replacement parts for an otherwise brand new machine. Thank you!

[chesterpertchik]

!!! Your diagnosis and recommendations are exactly what I'd love to see more of. No one else is doing this. Much thanks in advance if you choose to post more.

[AnytimeDoMore]

You are so polite Joe. That’s give you very special place in 3D printing community. I always super glad to see your videos. Please keep continuing this series. We really need this. Thank you..

[TheGibsonmark]

Please continue series, I feel like a lot of channels have moved off the "basic" troubleshooting stuff. This is actually the stuff I enjoy the most even though I know a lot now there is still more to learn, so please keep it up.

[agepbiz]

Yes! This will be a very helpful series! Often, with facebook groups, you get a lot of contradicting answers and end up more confused than you where to begin with

[elmariachi]

Good video, because you focused on problems that haven't been explained thousand times before, unlike many other YouTubers!

[bobhmg]

Joe, this was great as are all of your videos but this series will help so many. Please continue these.

[hitchabout]

before i got into 3d printing, i watched a months worth of videos on kit building or problems and lots of research to the point when i built my first kit, i knew what to watch for, fix while i was putting it together and what safety things should be installed before i turned it on. my first printer was the CTC i3 clone from ebay, 2nd is the anet a6 which i got a very good deal on and the 3rd the Ender 3. working on building a hypercube evolution now.

[potteryjoe]

The 3D community is full of helpful people, AND trolls. Thanks for being a shining example of a helping hand! Great video

[ksfurlover]

Thanks Joe for sharing printing issues. I think you pointed out my printing problem (nozzle to bed height). I'll re-level the bed and try again. The cable clamps printed fine until the top snap edge printed...then it printed separated strings on all four clamps.

[haydenfrost]

This video was amazing and exactly what i needed to stop my printer from flying out a window. cant wait to get home and play with coasting settings and ensuring my z-axis wheels aren't too tight. think this will be a great series. thanks heaps

[psychomarto]

And as always, helping the community! I'm so glad you are amongst us... You inspired me to get the Tornado, and 10 months later, and thank your help, I'm having my first potential customer... You rule and I might post an issue I'm facing, maybe you can have a look on it, wod love to hear your thoughts on that. You rule! Cheers!

[MrMike-fnhi]

A montage of Joe saying words like veedio would be awesome! There are so many weird issues that can pop up from time to time. The good part is that now a days there's a huge community and people like Joe willing to help. I remember the first video I saw about 3d printing was Jerry (Barnacules) with his Robo R1 and I thought I'm not alone with the 3d printer thing... how far we have come.

[HardCoil]

I just ordered my first printer, so I really hope this series takes off :) Good work as usual.

[zachchenoweth]

I've been printing on my ender 3's for about a year and a half now and didn't know there was a coasting setting in Cura... this is probably the solution for an issue I've had for months now and have been so irritated with. Thank you for making this video and hopefully that works.