How to Set Up a Draft Beer Regulator to a CO2 Tank

[linusstick]

Make sure to go and find the nut that is supposed to be on the end of the regulator. Just received their kegerator kit and there was no nut at the end of the regulator so I have to try and find one somewhere.

[danielduffield]

Wow, amazing that the instructions say to open the downflow gas valve before securing it to the tap. Skip a step?

[palmtree]

You left out the most important part. THE WASHER. What kind and how it goes in.

[gaoqi]

What a detailed explanation, I sell beer regulator, but this video has helped me a lot, sincere thanks

[zt]

what position should the regulator vale be in BEFORE the CO2 gas knob is set to the open position? Is the regulator knob turned fully clock-wise, is that the closed position?

[danzig]

Can you leave it on until the keg runs out or you have to turn it on and off to conserve the CO2?

[franciscosaavedra]

The other side of the blue hose is connected to anything?

[ज्ञानगंगा-खद]

After some time around huage has iceing tell me how to proper remove iceing.

[courtneyheney]

Should the valve be perpendicular or parallel to keep valve open? And, should it always remain open or only opened up when using kegerator?

[robertplas]

KC HL-62 gas leaking out the back of the valve when tank valve barely opened. Only way to stop any leaking from back is to turn off at tank. Help please.

[MrAlducharme]

can you provide some guidance on what to look for on the gauges? since I hooked mine up, I have the right gauge consistently at 10psi, but the left gauge (which I think measures what's left in the tank?) is just sitting there all the way to the left, in the red.

[albrough]

remember to install the white washer that is zip tied to the inlet, otherwise you'll loose all your CO2

[lucas]

That's a flat-head screwdriver, bruv. Thanks.