How to Change Headlight bulbs in Ford Escape 2013-2019

Hi, Quick video on how to change replace remove install. 2013 2014 2015 2016 2017 2018 2019 Ford escape. low beam high beam.

[GreenLea]

Thanks a million times over. My bulb was hard to turn. So I grabbed my scarf in the car and used it. Finally got it to turn. Where is a man when you need one lol. Ladies we can do it too! Thanks again! 🙏🏾

[mrv]

This video is much easier and simpler to follow than the others out there! Thank you! <3

[hembieashwe]

Wow!!! Thank you so much for this!!! Going to do it myself. Went to the dealer and they were going to charge me $47 plus taxes and the price for the bulb. I am so empowered right now. Thank you!

[TheArcher]

Thank you for this video. It’s Saturday my low beam headlight was out, and all automotive shops are closed and I-have to drive my car to work tonight. I decided to do it my self using your YouTube video, God bless you!!

[dochort]

If you push the center of the rubber seal (push the dome in), the seal comes out more easily.

[gak]

Thanks for the video- although the passenger side is way harder to do. The coolant reservoir is in the way (for the low beam on that side), and it' attached with clips which are impossible to get to. Finally, I had my daughter help me. My hands are not huge by any means, but trying to fit your hand back there with the coolant reservoir in the way has to be impossible for an adult man.

[ronj]

So easy! And I didn't even know how to pop the hood before watching this. Bravo!

[romamotion]

Thank you very much! Very easy. i changed my lamps in 10 minutes =)

[cynthiareyna]

Easy and simple video. Straight to the point. Was able to replace my moms light bulb 💡 on her car.

[davidkostuk]

For those looking for a solution to changing the passenger side headlight bulb. Here is what you have to do, no tools...works with big hands too! Step #1, gently take the coolant overflow tank off it's front clip, by pulling it upward and off the small metal post, this will give you about 2 more inches of room to get your hand into the headlight assembly. Step #2, remove the rubber cover off the back of the light. Step #3, unclip the power to the bulb and remove it. Step#4. Put a new bulb into the assembly and lock it into position. The plug and socket will nicely line up. Step#5 Just guide the plug into the socket and squeeze them together until you hear that nice click. Step #6, put the rubber cover back on and put the coolant overflow tank back onto its clip.

[Beth]

I just changed my highlights over couple hours ago. It was very easy for me to do.

[lamonthattley]

This was good advice and big help made it look so easy 👍🏾

[sunnyd-lyte]

Thx a bunch! I just changed my passenger headlight. Easy peazy 👍🏽

[st.cimmerian]

Excellent video. Definitely the best one I’ve seen with how to do this. Simple, clear and straightforward. Subscribed!

[Kelly-okrg]

I used this video for my 2016 and it was a quick simple job. Thank you!

[philhutchinson]

You may need the H11 bulb or the 9005 bulb, depending on your model. I have the SE and needed to 9005. Pull your bulb first to be sure. Btw, the 9005 is a longer buib and harder to remove. I assume the assembly is designed for the shorter H11 bulb but some a-hole engineer switched to 9005 without a care how the customer would be affected. I could not get the rear reservoir clip to release. From a tip in another video, I made a string lasso and was able to pull the wire harness into place and snap the bulb in. I did after getting the tip of the bulb into the hole but prior to seating it fully and twisting it into place. All-in-all, a horrible design, as is the battery location on this vehicle. A customer should not have to take their car to a mechanic for these simple tasks.

[mythicalgiraffe]

Well that was incredibly easy. Thanks!

[scottscali]

Thank you sir changing my fiancé’s headlights today to LED lights.

[simplyrvlife]

Wow, that looks easy. I have the confidence to try it myself now. Thank you

[nadiacontreras]

Thanks for the video! It was super easy to do it myself Thanks to you.