DIY Patio Table (with Trex decking)! | Plans Available!

Hey everyone, this week I'm going to walk you through how I made this DIY Patio Table with matching benches for only $350! This is a super DIY-friendly project, so don't be shy!

**UPDATE**
As requested - plans are now available on my etsy page, go check them out!

Materials List:
- Treated 2x4x8s - Qty7
- Treated 4x4x8s - Qty 3
- Trex Decking Boards, 8 ft (toasted sand color) - Qty 9
- Brown Trex Decking Screws - Qty 2 boxes
- Exterior-rated Pocket Hole Screws, 1 box of 1.25" 1 box of 2.5"
- Stainless Steel threaded inserts 1/4" - Qty 8
- Stainless Steel washers 1/4" (1 bag)
- Stainless Steel 1/4 -20, 2" bolts - Qty 8
- Sherwin-Williams Black Tricon Exterior Rated Paint - 1 gl

Affiliate Links:

All the music in this video can be found at:

#PatioTable #DIY #Falltime #TrexDecking #Woodworking #OutdoorTable #DonnyGrahamBuilds

[donnygrahambuilds]

Plans are now available - check the link in the description!

[Razumutaz]

After several months of struggling to get ideas and getting those ideas rejected, this is perfect for my eagle scout project I am working on! Thank you so much for this! This is actually a blessing!

[denko]

Would look alot cleaner if it had a picture frame boarder.
This is definitely a way to go

[brandontuckett]

Could you have 45 degree cut your outside pieces so you don’t see the bottom of the Trex?

[liyejun]

Youtube should recommend this high-quality DIY channel, and this video deserves more than 10 million views

[D-Wheels]

Can I use 6x6 legs? Did you use PT? Do you think I can make long benches rather than 4 and have them be sturdy?

[kathyhatton]

At 10:13 I see a skinny board between the wider ones on the top? I counted 6 boards across the top so where did that come from and why is it there? I am a NOVICE but want to build my own set bc the ready-made ones of resin are IMO junk. I can't go with typical type picnic as I need the seating to be open on the ends so you don't have to raise your leg to get into the table to sit down. I don't mind if they are attached vs separate benches but slide to get in.

[Dr_Dengrot]

It looks so good! You are very inspiring! 👍Will it hold to sleep on if the alcohol is too tasty?

[piccini]

Nice table, why not put miter cut at 45 degrees on each Conner to give it a better finish?

[jzavalaef]

What type of chairs do you recommend for this type of table!

[WizzardZero]

How long is this table? I am looking to build a 12' table and was curious if there were plans that work for that length, thanks!

[dimensionalbleedthrough]

Thanks for the video and inspiration! My wife and I made a version of this today. You don't happen to have a link for the glides/spacers you attached to the bottom of the legs? I couldn't find anything at Lowe's that seemed appropriate for outdoor use.

[robertwilkinson]

Do you have to reinforce deck to carry the extra load

[BasToWnAg]

Hey man! Please do some plans for this build! Was an awesome project

[bosoxk]

Sorry, what specific fasteners do we use? How many? Care to link them? Thanks

[BasToWnAg]

What height did you use for in the 4x4’s for the table and for the benches?

[thetruthfree]

What kind of orbital sander is that? It looks lighter than mine, mine is super heavy.

[ImranKhan-yjdl]

Great build. I’m looking to do the same but I’m a newbie DIYer - is it possible to post some detailed pics of the build?

[yannikin]

Why did you have to add the sliver?

Awesome video. Just found your channel. Congratulations on an awesome project for your fam!

[ganeshlange]

This video led me to a different video that was a little more cleaner looking