Finding the Best Truck Wheel and Tire Setup | Matchup Comparison

Who's ready for a tire matchup? In today's video, Junior reviews some of the most popular setups you can run and how the tire will "matchup" and look when mounted on different sized wheels.
You don't wanna miss this ultimate matchup setup comparison:

Comment below with your favorite wheel and tires setup and as always, like, share, and subscribe.

0:00 Intro
0:41 33x12.5R20 General Grabber A/T on 20x10 -24 Anthem Equalizer
2:27 35x12.5R20 Venom Power Terra Hunter X/T on 20x12 -44 TIS 544
4:38 325/50R22 Mickey Thompson Baja Boss on 22x12 -51 ARKON Lincoln
7:20 395/45R26 Fuel Mud Gripper on 26x14 -81 ARKON Caesar
9:24 Outro

#customoffsets #Tires #Matchup

[ezurmnd]

I run the mt baja boss 35x12.5 on my 20x12 and man everyone that gets in my truck are surprised of how smooth and quiet these tires are i definitely reccomend them if you are looking for an aggressive look and a quiet smooth ride

[dirtbikedude]

I remember when fuller did these and he made a 35 look like a 40 😂😂😂

[hottaters]

Can you do a video on these “square” setups? I dig the look a lot, keep up the great informative videos👍

[jeffshultz]

Thanks for the explanation. I was thinking of moving up to 22s. But that's pointless unless you really like the lower sidewall. And I don't!

[HTSS]

It's cool that you're talking about tires not letting rims get curb marked, but hey, use some MacGyverism to get it exactly.

If you want to not eyeball it for the sidewall bulge protection measurements, get a yard stick or just a 2x4 that's 40" long (anything flat long enough to cover the tire diameter). Press the yard stick or 2x4 standing up flat against the tire, then do the same tape measure from rim edge to the yard stick etc. And there you have the exact number.

Then even better, sandwich both sides of a tire and wheel setup with 2 tools as described, and use that to get not just tread section width but a literal overall width sidewall to sidewall no matter what, so you have exactly what width setup is visually on the truck.

[darellhunter]

Running 35x13.50 on a 24x12. Really like it on a 6" lift.

I ran a 33x12.50 on a 22x9 when I only had a level. Really wish I would've done a 10 wide but it was back when I was a wuss and scared to trim. Lol. Now, I'm like cut what you need to make it fit. Hahaha. Great video guys.

[tamonthompson]

Arkon Caesars 20x12 wrapped in nitto nt420s

[AaIsForAaliyas]

Arkon set on the far left with the tire set up.... Just perfect

[mexican]

I’m doing 35x13.5 on 20x10’s with a 6 inch lift. I hope it turns out ok🙏😬🥴

[JDMImportz]

Instructions not clear took off my 22x12 -44 forces wrapped in 305/40 venom XT (which rub & truck isn’t leveled) and bought 24x14 -76 forces wrapped in 33x13.50 venom RT’s 😅 im here for a good time not a long time!

[stevenskoog]

This couldn’t have been better timing 😅

[ZK_Wright]

I got my hoodie today and may I say it’s the most comfortable thing I’ve ever worn!!

[micahbowen]

Just ordered the Arkon Lincoln in 20x10.. can't wait!

[calebwood]

Would i be smart to do 20in tires and rims

[nitetrain]

Looking good with your new mop chop junior. I had new Amp Attack MT 37x13.50’s on 24x14 Arkon Lincolns put on this past Fall that I ordered from Arkon off-road. I already had previous metal/plastic trimming from my 37x12.50 on 20x10’s. I’m running bushwhacker pocket style flares and even with extra metal and plastic valance trimming for this new wider setup, I’m still experiencing a lot of tire lug catching going forward or reverse. My setup is a 6” suspension (and a 3” body) is what was added before my new install. My truck is a 2017 Ram 1500 Sport. I’m probably gonna remove my bushwhacker flares this summer when I take my truck out of winter storage as I live in snow county in upper Michigan lol. This should eliminate some thickness behind the tires I’m hoping. But then I’m wanting to run aftermarket wide trucker mudflaps. So not sure if I just have to run them on the back of my truck if they might cause rubbing on the front. I thought I wouldn’t have any issues adding the 3” body, but she still rubs. Thanks

[jyminewtron]

Just bought a mint condition 2003 F150 FX4 super crew with a 3in level and lift. I have 18in wheels and 33x10s for tires now. I want to go up to atleast a 20in wheel with 33 x 11.5 or 35 x 12 tire.

[terrellwinn]

I have 2017 Ram 1500 with a 2.5 level kit running Fury 33x12.50x20 RTs- what size wheels would I need?

[leadpilled]

Should have shown a 35 on a 17X9. It’s a killer look. I wish lift companies would make lifts that will work with 17s

[denorrisbowman]

I have a 07 honda ridgeline looking to put some 20" or 22" rims and tires on it. without any lift kit. can you help me out on this? dont want them sticking out from truck.

[ernietorres]

Can you guys pls do a video on offset comparison. Maybe do an interview with some of your customers that have uncommon sizes. To see what the minimum lift and trim needed.