Changed tap washers and still dripping / leaking? Do this........

How to fix a leaking / dripping tap. If you have changed the washers in your taps and they are still leaking / dripping then this is the video for you. I will show you how to repair and stop the leak / drip using a re seating tool. LIKE COMMENT and SUBSCRIBE for more videos. #DIY #howto #billshowto Your donations help me to keep helping you .....

[russellwarr]

The Tap Reseaters either hand operated or electric are a work of art, so glad I keep track of there where abouts. Note to self "tidy up the back shed". Thank you for the tutorial.

[taniamurray]

Bill the Tradie is a top guy, full of knowledge, skills and politeness. I fully recommend
👍🏻👍🏻👍🏻👍🏻👍🏻+

[TreasuredTreesCanberra]

Thanks Bill Show To. I had anxiety about doing this, bought the reseating tool and some new washers and then put it off for 4 months! Followed your video today and did it easy! Thanks legend

[Rayblondie]

I did the washers and re-seated the tap but it still leaks. I suppose I will have to get a new tap. I note these problems are always with the hot tap which tend to damage the whole seat eventually. Thanks for the explanations.

[jamesduff]

Really good content. You explain things well. Thank you!

[sambaxter]

Very helpful. Thank you, Bill.
1 Question: How many times do you estimate you can you clean up the valve seats before the branch becomes worn too thin?

[voson]

Thanks you very much Bill .❤❤❤ from Australia

[timsacco]

Been putting this job off because I thought you needed a plumber to fix it.Now I'm going to give it a go.Looks straight forward.

[simontrangmar]

thank you for sharing you kowledge and enthusiasm - it's kinda infectious - cheers from Adelaide

[slipnorris]

I changed both stems in my shower, still have the dam drip, I will look into this thanks

[sw]

Got one job did the same way take the head off and flush the pipe, however the copper shred was stuck in the flexible hose reduce water pressure. I would recommend take the hose off from the wall give the flushing. Or don't put spindle on, give a quick on and off completely flushed. It's my feedback.

[PrincessHVHHDSSS]

Thank you so much for sharing this with us Bill.
🕊🌿🌳🌲🍀🌱🌴✍📝🙏🔧👼

Especially loved the tip; remove shower head to clear through the copper shavings, then replace shower head; and all set to go!

Loved seeing the "behind the wall" parts, at the beginning of the presentation. I love understanding the whole picture.

Love in our Lord Jesus Christ,
Princess Holly
🕊🌿🌳🌲🍀🌱🌴🕊🌿🌳🌲

[jchtylmegekr]

this finally fixed my drip. had trouble finding the tool in canada but finally found it at princess auto. had to do by hand since it wouldn’t fit a drill, wasn’t the greatest but indeed did the job

[leroyybrown]

I got the reseat tool from Bunnings. Not the drill model you’re using but the model you turn by hand and it works great.

[nyctry]

Thank you so much for this video. Solved my dripping shower problem. 👍

[Lachy]

Unreal vid mate. Thankyou. Very helpful

[cherrelynnesaunders]

Great video with background explanations. Can you please do one on how to replace the seat when it's past the point of reseating?

[obsidiongamer]

Killing vid Bill, gonna run down to Bunnings now, for a re-seating tool Cobb 👍

[josemarti]

Nice video but Im dont have the tool ...so in a hurry time Im used teflon type and works amazing.

[redangrybird]

Oh mate, so daengerous!! Is there a risk of overdoing the resurfacing?
Cheers .