How To Convert Gerber Files to G-Code with FlatCAM

----
Find us on the internet:
-----

[michaelwilson]

Excellent tutorial. Clear, concise, perfect. Got me up and running in no time. Thanks again!

[arthuriasbeck]

Excellent. Perfect. Only tutorial that realy show everything we need to know. Saved my life.

[jeetsaini]

Great tutorial simple, short and too the point explanation. No wastage of time.

[bassgojoe]

This is one of the best tutorials I've seen ever for anything. Nice work!

[alainb]

An excellent tutorial.
I was stuck with donut type holes when drilling.

Thanks a lot !

[Altraiid]

Oh boy... This is gonna be SUPER useful, thanks!

[Mallyhubz]

Jeez following this in 2023 FlatCAM 8.994 in millimetres is hard work !

[Mecatronicgarage]

That's right very nice tutorial, very explanatory. Thankful!!

[HassanOmariprofile]

Nice tutorial, directly to the point, thanks!

[anlpereira]

In order to make the codes of bottom layer do I need to mirror the draw t generate the GCode? Thank you very much

[ThatJay]

ty! i'm gonna use this on my 3d printer with a permanent marker attached

[hw..]

This program does not support excelon format -- but supports a subset of. There are actually two Excellon formats, the older Excellon 1 and Excellon 2. Excellon 2 is a superset of IPC-NC-349. Commands from both are sometimes confusingly mixed in the same file. Excellon Automation stopped publishing the specification of its format, without statement on the IP and usage rights of the format. The specification is ambiguous, leading to different interpretations, especially in the area of coordinates and units. Otherwords it does not support format of most PCB layout programs.

[voxellab]

Is there a more complete install and run flatcam tutorial?

[nickr]

how do you mill the sol pads out of the soldermask?

[juanjosevalladares]

Hello I have a problem, when I export the holes file, it apears smaller than the paths file, how can I fix it?? :(
I was tryng by change the scale but it isnt so precise

[ltecsoluciones]

Hello, good afternoon, I would like to ask you a question
Sorry if my english is not good
When loading the excellon file I get scattered red dots and none match
With the design of the circuit.
What could it be
Thank you

[victorcontreras]

what program do you used for your design ?

[jeetsaini]

Bro next if possible please upload Video to concert G Code file from DWG (Auto Cad) file. Actually i have made many customised PCB circuit board in AutoCad file so I need to convert this dwg file to g-code file.
Thanks.

[djk-synt]

i need help my cnc eats some traces, what i should change? The tool diameter?

[tugasta]

Hi,
why do when I import the exellon file, the size (the dimension) of the exellon file much larger than the gerber, so the hole did not match, how to fix that ?
thanks in advance