2017 Tacoma Roof Rack Install

Показать описание

Mounting a factory rack on a 2017

Рекомендации по теме

Комментарии

FYI...VERY IMPORTANT. Fill each screw hole with silicone before securing. I had a leak and thought it was coming from the windshield. I went to Topperworld and they said to not rely on the rubber washers it comes with and recommended to silicone each hole, which makes sense. Save yourself some headaches and silicone first.

ejlacour

Just ordered and installed. Probably watched this video a 100 times. I picked up the kit directly from a dealership. The washer or nut to attach the pivot bolt on the passenger side was missing. Had to order the missing parts. Installation was smooth thanks to your video. Thanks!

Goofythumb

Right mix of information and personality. Thanks for the great how-to.

Edit: I filled each hole with silicone sealant before screwing the racks to the truck and recommend everyone do the same!

edvaughn

Thank you very much for the helpful video. It will save my friend a 20 mile trip to my house to help me, and will save me from buying him a 12 pack!

motosporttouring

Thank you for sharing this for all of us. I have 2 suggestions which caused me lots of problems. First, (and absolutely critical) on the passenger side secure the Swing arm nut with strong tape (underneath the bar) before beginning the mounting process. Mine fell out and I had to start over and retrieve the nut and tape it in place. There is a holder for this nut, but my nut fell out the first time. Second get all bolts started before coming close to tightening any of them.

michaelmahoney

Can anyone give me the link to where I can buy this specific set of roof racks please ?

ethansfera

Missing nut for me as well. Any way to get the Pivot bolt attached without taking off and redoing the whole passenger side?

michaelmahoney

Looks great. Would look even better on an old shot up Pathfinder, though.

pathyskeeter

I love the blue! What was your decision on this color?

Table_Topper_Tony

I have a 2016 access cab. There are no predrilled hole. No rubber casing

tomlloyd

Added mine yesterday. my advice is to not bend the bracket. I did and it was more trouble than it was worth because it misaligned the bracket to the rack.

remgu

Great video and thanks for posting, I am going to purchase one of these racks next month. By the way, what type of lift and how high, do you have on your TRD. Thanks

findadventure

So the rack I got left 1/8 inch gap in the front by the windshield. Not sure why its a toyota part. I had a leak on left side. Did yours have a gap? Any suggestions?

ejlacour