Top-5 mistakes in soundproofing

#standartplast #tuning #cars

[hjstd]

What a unique Anglo-Slavic accent! That and the advice given makes you want to pay close attention. Thanks for putting this up.

[JMetz]

I'm about to install soundproofing in my car, and that last mistake in particular was absolutely an eye-opener. Thank you!

[sonyaroman]

this is a well explained video of how the transmission of different sounds can be greatly reduced. i have watched many videos on sound deadening cars and there are a lot of people putting out confusing bad information. i did need to watch it twice. the 2nd time with the subtitles on. it was worth the study. than you. i think part of the problem wasn't his accent as much as the sound quality wasn't great.

[fotoflorian]

People complaining about the accent burns my biscuits. Those same people can’t even be bothered to learn a second language…

Nice video!

[hjstd]

The last tip emphasizes the importance of surface preparation. The video shows heavy rust damage to the floor pan (road salt?). How would proceed in this case? Do you quote the customer the cost of removing the rust and repainting before continuing?

[vevenaneathna]

heh i used 20mm thick zirconium ceramic wool to insulate my fender liners. technically a heat insulating material for super hot furnaces, but its way more effective than anything being sold right now for this application. shouldnt ever break down.

[ZBrink]

I'm sure this is very good information but I legitimately cannot understand the person speaking ☹️

[babuahamed]

So you advice to use a thick deadning pad of 2mm for this

[dusty]

What type of material would you recommend for the inside of a boat motor Cowling ? Foam, butyl ??

[muralimv]

Hi sir,

what is the melting temperature of foam?

[bujgjiko]

On doors is not recommended to instal thiker than 2.2 mm

[g.s.]

This video is a BIG MISTAKE. You've no idea how to soundproof.
Using more than 25-30% of the coverage area to dumpen the vibrations - the first mistake.
Using foam, which is already included in greater amount in your carpets on the floor.
Using cheap Russian products being sold all over the world - STP. Cheap made. Expensive sold.
You always need 3 layers:
dampening/absorbing/blocking (alubutyl/felt or polyelster or really thick polyurethan foam like 3-5cm not mm/epdm or MLV). And that's it.

[rainy_amerei]

искал зарубежные ролики а нашел питерцев)

[TheoHerwijnen]

Stripping your car and applying sound deadening costs a lot of money and effort. Why don't you just buy silent tires

[erikthehondaguy]

Good Video except for the language, it’s almost impossible to understand what you are saying. You should have let somebody else talk instead of yourself. Pity.

[georgesavu]

What sort of English dialect is this? I can barely understand what you are saying.

[FrodeLøtvedt]

A few years of english would improve this advice even further.