How to connect 2 wire Delco 10si and CS130 alternators using charge connector plugs

How to connect 2 wire Delco 10si and CS130 alternators using charge connector plugs

Alternators

Delco 10Si Alternator 2 wire connector plug

Delco CS130 Alternator Connector

Alternator Charge 10AWG Charge Wire

Visit Our Store
How to convert any vehicle to 12 volts Free guide

12 Volt Kits

12 Volt Conversion Kits
Vintage Auto Garage started over 15 years ago, offering single voltage regulator/reducer to power original oil, gas, and temperature gauges when converting classic cars and trucks from 6 volt to 12 volts. Since then, Vintage Auto Garage has developed complete 6 to 12 volt conversion kits for almost every American classic make and model.

Our kits have been shipped to every continent in the world, used by every antique auto that was built with the original 6 volt positive or negative ground electrical systems. You can find all of our kits by year, make, and model below, and if for any reason you do not find one of the kits on our site, we likely still have the conversion parts available and are likely in the process of adding it to the site in the future.

If you have a project, large or small, that requires converting from 6 to 12 volts, and you cannot find your vehicle in our inventory, click on submit your project and one of our team members will send you a complete list of parts for your specific classic auto.

[buddyboy]

Jay, Your the first and only person to fully explain how to wire an alternator !! I must have watched 20 to 25 videos on this until I came to yours. Thanks so much for the info !!!

[pauldebenham]

I'm the same as Ken below watched loads of crappy long videos just trying to find the info you gave us in minutes thanks bro, Paul from UK

[roosterup]

I appreciate your advice. I was lost on my backyard project but I think I can get it going now. Great video.

[davidiverson]

I really appreciate your video. It clarified where the alternator output wire goes. Thanks for posting.

[joshualjohnson]

Awesome video. I have done several alternators but not frequently and always forget which wire does what. This is the best video and most to the point I’ve found. I’m sure I’ll refer to this video several times.

[madsardthung]

This is very basics and very important valuable knowlegde, straight forward explaination and easy to understand.. It's really helpful!! Thank you shared your video.

[TeamAustinn]

This really helped! I had bought an alternator with a similar set up to the first one you showed and I was wondering how I should go about hooking it up. Thanks a lot!

[DNoil-pfuc]

May god bless this man....he totally helped my solve the problem on my 1972 Impala!

[MrTruetoform]

Thank you for making this easy to explain.

[benferguson]

Thanks for posting this.
I hope these instructions apply to the ACDelco 335-1222.

[WindWattsHobbypage]

Very Informative & Useful Thanks Dude!.

[jeremymoran]

Thank You sir, great video and appreciate the help and explanation. 👍

[adrianjedidiah]

Very nice explanation i use phone hedasets to listen to you. low volume lol.but like like like this vidio

[jonathanolsen]

Thanks for this video, I have a 2 wire alternator from a 63 chevy small block, the motor is mounted on my run stand, I see that on the back of the alternator there is a wire that goes to the "+" side of the batt, on the white wire that you have where does go to. Big thanks...

[UnbutteredToast]

what do you do with the white cable on the first one?

[ChrisFlims]

If it doesn’t have a good ground will that cause it to die when I take it off the jumper cables

[relaxbecalm]

I found out about the diode after starting the car I was redoing and had not put the whole exhaust system on with only open headers. I was standing in front of the car and ask my friend to shut it off ...the second time I ask him he held the keys up and said I already did lol. Live and learn. You need a diode in your back turn signal lights also when wiring an old school turn signal on the column or you end up with flasher when turning

[entinipikire]

I have a 70 amps alternator what type of diode is recommended??

[mikelangieri]

Jay... I've got a Powermaster #67293 and I recently installed a serpentine setup which has the alternator on the driver's side. My old

[dodongcamirino]

thank you for your sharing about that.