Kali Linux - Disable Nouveau driver and Install NVIDIA Driver with CUDA Tool Kit Debian 12

This instructional guide will provide a step-by-step procedure on how to install NVIDIA Driver and CUDA on Kali Linux, a Debian-based operating system. By following the instructions provided, you will be able to successfully install the necessary drivers and tools required for your NVIDIA graphics card to function optimally on your system.

Since the steps are similar on Parrot OS, you can use the exact instructions that I made for Parrot OS.

➡️ Should you find this tutorial helpful, we kindly request that you consider supporting our channel by subscribing to our YouTube channel or using the affiliated links and URL shortener links provided below. Through your purchase using any of the given links, we will receive a small commission, which we will use to expand our channel and enhance our services. We appreciate your support, and we remain committed to providing you with quality content.

© SYSADMIN102™ LLC

[AilingUncertainty]

For my case it boots up to a blinking cursor after disabling nouveau, the cursor stops blinking after few seconds but nothing happens after, doing crtl + alt + f1~6 does nothing, only crtl + alt + delete works, which is rebooting the computer

[zainalgarady]

After i type last command 'reboot' the screen is freezing in dragons image ? What the resolve

[xdanic]

I've been watching many videos because always the blaklist step seemed hacky, but thankfully everyone does it the same.

One thing you didn't do was installing dependencies, something others do is letting the nvidia.run disable nouveau, after viewing more videos I prefer doing it manually since it doesn't seem like "hacking", I would also think going into other higher tty would be better, also you don't stop your display manager, gdm3, sddm or whatever you might be using.

[wensescheffers]

After i reboot i will get the kali lunix thing where i can go in afvanced options or normal boot if i do notmal boot i will jave a _ that blinks after it will ho way and my screen tays black its still on but it stays black

[رفيقالاحلام]

Hi
when i use this command ( sudo update-initramfs -u )

the output is

W: Possible missing firmware for module i915
W: Possible missing firmware for module i915

[umranideveloper]

i have problem in Kali Linux when i successfully install kali Linux on my System after installed done getting free i don't know why kali Linux, parrotos, Linux mint, blackarch all getting freez after install Only Ubuntu not getting freez what is problem there ?

i have gaming laptop.
$ lspci grep -i nvidia

01:00.0 3D controller: NVIOTA Corporation GM107M [GeForce GTX 960M] (rev a2)

01:00.1 Audio device: NVIDIA Corporation GM107 High Definition Audio Controller

[GeForce 940MX] (rev a1)

[Kmax]

Ctrl + alt + f1 not working it suspend the system idk why😢

[Mangox]

after the .run it says The NVIDIA driver appears to have been install previously using a different installer (i never did that). So its telling me to use debian packages rather than .run files and it terminates the install. so should i maybe use debian packages?

[sumit]

sudo update-initramfs -u while I run this I am facing this type of error...

update-initramfs: Generating /boot/initrd.img-6.8.11-amd64
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu
W: Possible missing firmware for module amdgpu




please give me this solution...

[steee]

3:58 after this reboot it doesnt automaticaly go into ctrl+alt+f1 and lounches nouveau anyways. What should I do?

[juanmanuelmillansanchez]

HI i'd like to ask if it works for debian 12, i not sure if it will vary that much from kali linux to debuan 12.

[Jean-uwtz]

Excuse me, this is possible to use on mint lmde? since its based on debian

[DibyenduBhowmik]

Unable to find the kernel source tree 4:34

[OleksandrSe]

Okay, so I think that I did everything as in video, but after reboot I get hub "my graphics card numbers" config failed, hub doesn't have any ports! (Err -19)

[rajkumariyadav]

sh command not found and also cant go to cli mode, it just keep exiting

[GamePlay-hcbb]

Hệ thống báo không tìm thấy nvida..tôi đã cài Kali linux qua VMware..giúp tôi với

[codingshortz]

i get error when i run sudo sh the nvidia file. it says disable x server?

[cipobob]

Great video but I had to disable x server

[SoundinLikeThunder]

When I type lspci | grep -i NVIDIA

I get nothing

Please help buddy

[travislodes]

I got my system back to normal, but no nvidia drivers. When I run the update-ramfs -u it gives me errors saying the line options nouveau modeset =0 is an issue