How do I connect Kärcher accessories to my pressure washer? | Kärcher UK

With Kärcher original accessories, you can optimise the power and extend the areas of use of your cleaning machines. Accessory kits are the ideal solution for special tasks, such as sandblasting with high-pressure cleaners.

Step by step guide to connect Kärcher accessories to your pressure washer:
1. Push the bayonet connection into the trigger gun and twist to lock into position

------------------------------------------

▶▶ FOLLOW US ◀◀

[billybobinthehouse]

For those who want to get it off, push attachment in and twist - works like a charm

[ralphboelen]

If you cant push your accessory to the gun, check if this yellow piece didn't get stuck inside the gun (coming from a previous accessory you put on), if yes remove it easily with a flat screwdriver.
Hope that helps

[county]

Thanks, i was in trouble until i watched this, the little yellow insert from one accessory was stuck in lance so i couldn't put on a different accessory

[abdullaal-haddad]

Honestly, I spent 2 hours so far just trying to remove it. I can't even.

[felicityrossi]

The springs always get pushed too far down. Impossible to push attachments or twist into place. And the hose always pops off too. Tried a screwdriver, long nose pliers, buying new springs and yellow plastic bits. Expensive to buy- cheap manufacturing.

[michaelsheridan]

Why does no one mention the cheap and frustrating Karcher interlock system for swapping out attachments, just took off main lance, yellow insert left on trigger. Removed with long nose pliers, fitted karcher foam gun leaks from interlock and yet another yellow nozzle left in the trigger wish Karcher would sort out have loads of attachments but hate to change them as you don’t know if they are going to disconnect or connect correctly.

[MichaelMarshall-mjto]

Just push and twist. Easy when you know how . . . impossibly difficult if you don't.

[MrStainlessstevie]

Both lances on my K4 full control simply cannot be pushed in far enough to enable the turn to lock, no matter how hard they are pushed. The video makes it look easy - it certainly is NOT on mine, which I suspect is badly manufactured.

[oddsandwindsocks]

I've got problems, the connection wont twist then turn, so I can't use it, I used the snow foam then tried to put the rinse gun back on, now all attachments wont connect

[cheapdomainnames]

I found this video buy googling, I can't fit my karcher attachment in. Video wasnt amazing but the comment have been. I used the foam attachment then tried switching over and couldnt then get any other attachments in. Sounds like a common issue where the yellow plug comes off. I also used some plyers to pull of the yellow plug to restore. Foam attachment had only been used 3 times, debating what to do....bin?

[kangaroogroundboy]

It doesn't show the end of the bayonet so can't tell whether I have correct bayonet for the K4 which won't accept the lance...

[BenKingbk]

Doesn’t even bother to tell you how to unattach?

[moist_potato]

I have a problem on the full control k7 where when i put the t racer on it this its still in solution mode and is very low pressure

[jamesj]

How do you get a replacement lance? No matter what I try the lance will not attach to the handle in this way because it will not push far enough in to twist. The T450 attachment connects easily so it isnt the handle...

[MarcinSperka]

Push the "B A Y O N E T" connection

[nicolaflaherty]

My karcher accessory is not pushing in?

[jillianoconnell]

What in the actual fuck is this supposed to show?..

[rossalexander]

This is not at all how this works, the quick connect is absolute crap, spent an hour trying to put an attachment back on just packed it up and will go get a different brand that actually works, wish I had of read the reviews first, would have never bought one .