CC3D with CleanFlight - Setup

I flash my HobbyKing 250 LF experimental quadcopter with CC3D with the CleanFlight Firmware and see how it flies.

CleanFlight is available at:

Copter frame:

The copter flown in this video:

- HobbyKing 250 LF
- EMAX PM1806 2300Kv motors
- CC3D with CleanFlight flashed Firmware
- 3S 1300Mah Battery
- Immersion RC 5.8Ghz 600mW Video transmitter
- FlySky 2.4Ghz 6 Channel Receiver
- 700 TVL Board FPV Camera
- 808 #16 720 Video Camera
- 5V external BEC

[FPVcambodia]

The failsafe has to be binded properly first with your receiver, before Cleanflight can take over with its failsafe feature taking control....Read your receiver notice lads! Thanks for this great video, as I cannot agree more on the fact that the CC3d is a much better board for beginners on CF one we understand how to nind our radio with a receiver and a flight controller! Thanks again! Safe Flying Lads!

[RichardHamilton]

Great Video and lekker to hear a fellow Saffa ....

[zico]

you right I have problem with yaw using pwm too.

[tonyglez]

I did the same but with some different procedure and my cc3d board is working in PWM by looking at your at your screen shot .Are you using Bluetooth to configure the board?

[jmgc]

which kind of PWM to PPM converter did you use?

[tonyglez]

Is there any BIN files or HEX file or whatever file to flash the multiwii 328p Hobbyking board or Crius multiwii SE_v2.3 to use it on cleanflight just like for the CC3D (I hate ARDUINO CODES)

[justhackitfpv]

plz tell me the type of cable used in video is it 4 pin or 5 pin ?

[TheRctest]

hi i got a problem when i try to arm my quad (cc3d/ oneshot on esc and cleanflight) the motors starts to beep how can i solve this?

[blackmennewstyle]

Aww! You can not use PWM, that's sad for people who do not have a PPM receiver, they have to use a converter :(
Anyway, very nice tutorial video!
Thanks for sharing

[bdm]

I have the Tarot 130 and am unable to get it to power up when connecting it via the "unique" USB cable. Any suggestions that you can offer?

[scottsiler]

yes i am using the chrome config   but the  top right only has bluetooth connect not usb  option so i cant connect to the board.  it does not recognize that the board is hooked to the usb?

[peralexandermoan]

hi there. i dont find any option to where i can config the arming method... thanks for any help :)

[progettoaladino]

hello i have a tarot 250 with cc3d based setting, but I noticed that when the battery begins to run out always ends up falling over, is this normal?

[leotl]

There is a way to use pwm, disable vbat and try changing around all the channels ports. The one I thought was ch1 had to be ch7

[TheBluntmanblue]

I flashed cc3d with cleanflight but when I throttle up it flips forward. Do I need to change the esc signal wires to match cleanflights motor config. cc3d motor 1northwest to cleanflight motor 1southeast?

[rebelkline]

What version of Mac is this running? I not able to get cleanflight to see my quad in Sierra. Any ideas?

[mapeare]

I tried and failed. How to return to original baseflight?. Must have baseflight.bin? thank you

[gloriaross]

Hi Si
How do I  get windows 10 to work with cc3d  Version 4 firmware of my board ?
Ross

[danielmartensson]

How to update to newer cleanflight firmware on cc3d?

[mapeare]

Vivian, thanks for the reply, but the halt is disabled