Check electrical short before install new fuse # car electrical # repair # shorts # mechanic

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

Didn’t show the blown fuse. For those that don’t know.

There’s the power side and ground side. If guys is blown it can show power on the power side, since it’s blown. It doesn’t complete circuit. So no power to the other side.

Hope that helps. 🎉

aLaCartePizza
Автор

He is checking a blown fuse with test light. Thats it.

dannyyo
Автор

I can’t read your mind, if I could, I’d be in Vegas….so what are you showing me?

filmart
Автор

Dont make silent movies this isint the 1800s

jhnsls
Автор

Changes fuse. Blows.... rips out dash for electrical shorts....
Story of my projects

KOFlipN
Автор

U cant just send power down the terminal not knowing where its going, can blow the pcm this way??!😅

Khans
Автор

My fuses appear fine. But im not getting power in my headunit. Will this tool tell me if theres a short in that fuse wire?

dreezyfranklin
Автор

So basically you have located a blown fuse and just replace it without knowing what caused it to blow? Good luck with that.

antoniocliffuk
Автор

Why did he move the connection from negative to positive when he was checking the side of the fuse that showed bad on negative?

ukjw
Автор

Checking for a short 2 ground b4 he puts new fuse in. The first test already told him fuse was blown.

slapaho
Автор

If those fuses are causing the whole fuse box to almost come off you’ll be good bro lol. If you unbolted it coo.. idk why to test a fuse. Bolt it down problem solved lol. Are you’ll find yourself looking in to the “Control Area Network” Bro……. I seen a few good ppl lose there minds trying to figure the can-bus 😔

Stunna_ECN
Автор

I am working on a 2018 navigator that keeps burning the led module for one headlamp then eventually the other side goes away too. How could I trouble shoot this ? The scanner shows short to ground on lighting system. It was in an accident and I repaired it.

flightmedic
Автор

Ive checked all my 20v fuses all the contact are good no splits.. no power to the 12 v power outlet in the truck.. help

shawncontreras
Автор

Hello bai relay check ke uppr vi koi video bna do with out malti meter krab hai ja thik hai

kcwznmb
Автор

Ya but why did it blow out to begin with

topnach
Автор

You could pull the fuse to see that it’s blown.

JohnHansen-njzs
Автор

Just put a 30 in it if it keeps popping

alloutdoors
Автор

How do you check the 30 and 40s box fuse? Do you have to take off that clear plastic top and check the brass contact pins?

josieboyy
Автор

Did you put the test light on the negitive to to check

grimtim
Автор

My lights stay on on my dash board and radio when truck is off, could I check for a bad ground or blown fuse like this, or what do u think

rodolfoguzman