Arduino UNO bootloader using usbasp programmer

Показать описание

For those who want to resize the project and make it smaller. Since Arduino UNO
is fully secured with the power circuit. But in case we did not want all of these components and
wanted to make our project standalone without using an Arduino UNO board but using an Arduino UNO bootloader.
So, This video demonstrates How to bootload and make ATMEGA328/ ATMEGA328-PU as your Arduino UNO board with the basic components. Keep in mind that I am not using ATMEGA328P which is a little costly and used in Arduino UNO Board. Here to make it cheap, I used ATMEGA328-PU or ATMEGA328 (it will work) with the basic component
Like 16MHz Crystal, 22pF ceramic capacitor, 28-Pin IC base, 1-1K or 10K ohm resistor to pull up at RESET PIN of ATMEGA328.

FUSE BIT AND LOCK BIT SETTING
L-0xFF
H-0xDE
E-0x05
LB-0x3F .
🪔 Please help to grow my channel by subscribing to my channel:
👉 You can visit my website and find interesting projects.

⚡🌟⚡🌟 More Projects below🌟⚡🌟⚡

🧸 Game using Arduino

📡 Notice board projects

🏡 Home Automation Projects
🔥 Firebase Based Home Automation
☁ Google Assistance Home Automation

⏱ RTC Projects
🕜 Schedule ON/OFF devices using RTC

🕜 Timer, Stopwatch, and Alarm

🔌💡 AC voltage controlling Projects

👉 ⛅🌈Weather Monitoring Project

👉🖨️ Thermal Printing Machine DIY

⚠️Disclaimer: It contains Amazon affiliate links. which means I can get a small commission on the sale.
This might be your indirect help to me.

🌟 Material Requirements: