Add Character To Picture Frames Using The Dremel Shaper/Router Table (231)

Add depth to your favorite picture frame with the Dremel or route consistent lines anywhere else with the Dremel Shaper/Router Table. Consistently slot, edge, groove, or sand your work no matter the shape. Tackle all of your repeatable, light-duty detailing projects with ease.

To get started, secure the Shaper/Router table to your bench using the included mounting hardware either directly to the table or to a 2" x 4" clamped to your workbench for added portability. Once mounted, loosen the clamp knob under the platform and turn the depth adjustment knob to lower the tool holder. Remove the nose cap from the rotary tool and place it in the tool holder with the on/off switch facing out. Thread the locking nut clockwise onto the tool and tighten with. the provided wrench. To install routing and sanding bits, insert them into your rotary tool with a maximum of 5/8" protruding past the collet nut, tighten using the provided wrench and reinstall the tool into the router table. Use the depth adjustment screw to set the cutting depth and you're ready to go!

Compatibility:
Dremel 100, Dremel 200, Dremel 3000, Dremel 4000, Dremel 4300, Dremel 8220, Dremel 8260, Dremel 8250, Dremel 8240

📱 Stay connected

Where to find us

❔ Questions, comments, or concerns?

Download the full Rotary Accessory Guide: