How to Replace Interior Door Handle 2007-17 Ford Expedition

preview_player
Показать описание
Buy Now!

Interior door handles can take a lot of abuse over the years being pulled on to open and shut doors, or banged up if you load things in and out of your vehicle frequently. In which case, you may have trouble getting in and out of the vehicle! This video shows you how to install a new interior door handle in your 2007-2017 Ford Expedition.

This process should be similar on the following vehicles:
2007 Ford Expedition
2008 Ford Expedition
2009 Ford Expedition
2010 Ford Expedition
2011 Ford Expedition
2012 Ford Expedition
2013 Ford Expedition
2014 Ford Expedition
2015 Ford Expedition
2016 Ford Expedition
2017 Ford Expedition

Tools you will need:
• Pocket Screwdriver

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Рекомендации по теме
Комментарии
Автор

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

TRQ
Автор

The video does not mention that the short end of the spring attaches to a small hole (groove) on the door handle. This holds the spring in place and provides tension.

PaulHenreid
Автор

my door handle is opening from the outside but not the inside. does anyone know if this fix will work or if i need to do something bigger (cable). Thanks

holdenziels
Автор

I should have watched the video first. I spent 20 minutes trying to figure out the spring thing.😂. Thanks again for all the information guys! You saved me hundreds of dollars for something really simple.

Darren
Автор

The video and comments helped took 20 minutes at most

wqeupkv
Автор

What size is the bolt -- what do I need to remove it?

cathylanier
Автор

Thank you so much!!
I just exchanged the door handle effortlessly Thanks to you!!🎉

rockerstockton
Автор

Great video, and made this replacement really easy! Thank you!

LarryDeane
Автор

Can I use the same process with a 2007 Lincoln Navigator?

dbone
Автор

That was awesome... thanks so much for this. It was much easier than I thought it was going to be. ❤👍👍👍

Outside-In.
Автор

Hey - has anyone had the plastic piece that holds the top part of the handle in place break? Looking for video on how to replace that - also where to get the part :). Thanks!

mattlscc
Автор

Headed to the junkyard today for this thank you!

tonygutowski
Автор

Your video made this so easy. Wish I had done this before and not driven around with torn up handles!! 😂 Thank you!!!

jenniferwouters
Автор

what broke??? both handles look the same

raybosflorida
Автор

Do you have a video for how to replace the wire if it snapped? Mine snapped.

bendavis
Автор

What is the size of that mounting bolt on the inside of the of the handle?

ZoeyGamesHere
Автор

always tricks are missing in your videos.
there are some vital tips you do not say a thing about.

it is not that straight.

raedm.n
Автор

You can't see the cable fitting into the hole. Also you can't see where the spring attaches. Poor video work.

RobertSauls