How to Replace Front Strut 2001-07 Toyota Sequoia

preview_player
Показать описание
Buy Now!

TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2001-07 Toyota Sequoia.

This repair was done on a 2003 Toyota Sequoia SR5 4.7L and the process should be similar on the following vehicles:
2001 Toyota Sequoia
2002 Toyota Sequoia
2003 Toyota Sequoia
2004 Toyota Sequoia
2005 Toyota Sequoia
2006 Toyota Sequoia
2007 Toyota Sequoia

Tools you will need:
• 19mm Socket
• 21mm Socket
• 3/8 Inch Impact Gun
• Socket Driver
• Rust Penetrant
• Hammer
• Rubber Mallet

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Рекомендации по теме
Комментарии
Автор

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

TRQ
Автор

Thank you for showing the struggle to get the bolt back in. The fight is real.

bripro
Автор

Carefully remove strut....proceeds to pry it out straight to the ground hahah

RobsLounge
Автор

Running these struts on mine. Great deal for the price in my opinion.

idriveslo
Автор

putting the 19mm back should be the other way around as it may cause the front axle to hit when rotating and steering.

khaledelgomati
Автор

Hey does it matters if it’s a air leveling strut because I bought a air leveling suspension

notagainboy
Автор

I just wanted to know what the best Quick struts that I can put on my 2001 Toyota Sequoia SR5 the front struts

william
Автор

Because, when reinstall new strut, put the bolt other way. ??

tikochavsd
Автор

If you the upper joint and sway bar link loose it will be easier

MultiDreamer
Автор

bottom coil over bolt needs to go back how it was removed... as installed now, cv boot will rip open and loose all grease! Armature move.

rileyandikeysplaytime
Автор

Total shade tree. That’s five minutes I won’t get back.

philliparmenta
Автор

This is the lazy way, the product you promote does not have even boot to protect the shock👎

americanrealitytoday