2002 passat ABS sensor code 00285

diagnosis of a ABS wheel speed sensor trouble code 00285

[timbrunk]

My car recently freaked out on a braking turn and I slapped my VAGCOM on it because I had no ABS fault but the sensor on the front right wheel refused to record movement. I had a low vibration feedback through my brake pedal intermittently at stopping (my only indication anything was wrong but that didn't manifest until recently) and rotated the sensor and pushed it back in after tugging a little on it and it fixed my problem. 😀

[EXOVCDS]

Time to download the latest version of VCDS. =)
I like the signal generator!

[jash]

My b5.5 has TCS light always on, I’ve tested a few other things. Could this be it ?

[formidable]

I have an issue whereas the ABS kicks back through the pedal at low speeds when coming to a stop.
This has started after I changed a top track control arm.
VCDS scan shows no fault found and no ABS light.

[niume]

what happens if you don't replace it?

[deosdetejesus]

qui no brasil tem que ser na base da ganbiara porque se for compra a peça fica mais caro doque o carro

[redouanezerfaoui]

it will be good if you showed us how did you connect the wiring with multimeter and abs wiring or you can upload diagram please

[eberjimenez]

good morning I come from a post from you on the Internet, I hope you can help me I have a jetta 2001 autimatic 01M transmission the problem that presented is the following I made a change of fluid tranmicion.

After the change the vehicle once arrived at its operating temperature I throw the code P0768 Solenoid D with a generic OBDll scanner, once the vehicle is cooled the code disappears and reappears once it warms up therefore the transmition enters in safe mode (stays in 3rd

 speed) my question is that I should check and if you could help me to know which is the solenoid D

since I do not have a vagcom to give me specific codes for your help many thanks

[peterlaskov]

nice video thanks a lot, i have just changed a new sensor but still have the same code00285 will check a wiring tommorow but i have other questen pls i have code 01119 gear recognition signal AT probably is wiring a problem but where is that part or what could be a problem, its passat 5 automatic 1, 9 tdi 96 kw 2004y. thanks my friend anyway

[takidjoud]

Changement du câble abiesse de la roue du Passat 130 tdi