HOW TO INSTALL THE NEW (WITH UNDERSCORE) FPCB KIT

This OLED kit works for all eMMC brands from Samsung, Toshiba and SK Hynix

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Music :

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
CONTACT & DONATION

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

[tealflip]

Welcome back, Sthetix. Another great video as always.

[wing]

I'm still waiting for your picofly installation video.🥺🙏

[escapetherace]

2:00 that joint is gonna break dude, tsk tsk

[chipfixnorge]

Did it a few days ago :) A little trouble to get the scraped via to adhere. Should be placed to the side for easy visual verification.

[sime]

Hey Sthetix there where u scraped i by accident scraped and broke the line but managed to get on the to fix the pad should i be fine

[impyy]

Would love to see a whole video of installing this whole kit.

[antoniomoraavalos]

So, is it connected directly to the board through the flex?

Or the tip of the flex is flying?

[kronicbowlz]

These cables are the best ones to install

[spankodzn]

Hi ! Thanks for your video but I have a question, at 1:10 you solder the capacitor to the 3.3V pad but do you bridge together the 2 capacitors and then solder to the 3.3V or do you just solder 1, I hope my question make sense, sorry I might not have the right vocabulary.

[LESLEYYY]

1:08 that 3.3V seems to be connected to the two resistors. Is that intended, or just not a problem?

[arokglez]

Hi, I already suscribed, awesome content.

Just one question, I like that v6 is able to boot OFW without a reset button but... What's the difference with picofly, I don't know why many people prefer picofly (RP2040 based) I saw that there is a version RP2040 that looks like hwfly, is it has another features? Thanks

[salamander]

@sthetix I have the d1 mini and that tip that is seen in the video is not the same, the 2 that look similar to me, the tip, although thin, is cylindrical but yours is very conical, do you use a special or different tip?

[wrth]

On the V6 video you avoided the kit due to interference concerns. Do you still prefer wires now or do you approve of this kit?

[Mirror]

Thanks for the video. QQ: How to plug it to the kit? Won't the connector end up being upside down?

[Pod-]

Thanks a lot for the video. I installed InstinctNX with this flex cable on my Nintendo Oled. It worked, however sometimes the chip flashes red or orange and quickly bot to the original system. Did I leave any poorly welded points? My nand is hynix. I heard it's problematic.

[delatorrefam]

Do they still need to install the CPU Flex? or no need?

[MrCANER]

If I wanna mod my OLED Zelda TOTK Switch with a chip today, do I need to consider some things ? I heard the built of the EMMC chip is different compared to prior OLED Switches and causes issues to solder the DAT0 adapter. Which OLED chip is the best currently ?

[pantyshts]

Hey, not sure if its fine but I am getting a diode reading of 1.1v on the 3.3V, could this potentially kill my board if I try to turn on the switch?

[louiegonzaga]

Hi, Sthetix! I tried modding my switch OLED but I messed up and destroyed my DAT0 adapter. I decided to removed the mod chip and this kit and reseated all cables properly. At first, I was not getting any life from my console, but after cleaning the board and put back all the cables properly, the console was able to turn on but I was a getting a purple screen and google search says that it was the CMD that was either damage or not properly unsoldered. I ordered a brand new kit, but the question is will it still work if I just install a new kit like this? Thank you in advance!!

[falconmick]

Quite often I see people skipping using this flex because of reliably, is this one good?