General Finishes Outdoor Oil

preview_player
Показать описание


Рекомендации по теме
Комментарии
Автор

love your favorite piece of wood. the lines in it with the finish is beautiful.

wasblind
Автор

Normally I want to smack creators when they drone on and on and I'm trying to get the info quick. But I happen to be driving and listening and when I come to a stoplight I looked at the wood to get an idea but other than that I was listening while I was driving and I quite enjoyed it and you cracked me up a few times and that shit looks amazing!!! I'm hoping it can solve my cedar staining problems. Getting a consistent, or replicable result on cedar is an absolute bitch because the types of cedar out there are the quality and the grain and the coloring very so much. Thank you for your video it really help me a lot :-)

coppulor
Автор

Ha, I'm with you on the t-shirts. I have like 15 cheap cotton t-shirts from Walmart that I pretty much wear everyday. In the winter, I wear a hoodie over the top.

BrianHw
Автор

Would love to hear your thoughts on the longevity of the oil, given it’s been so long. Thanks!

Tee-Tee
Автор

when I get my master card in a month I'm definitely going on Patreon, love the content.

zacnicholas
Автор

General Finishes looks great, thank you for sharing products you like.

tammymcclimans
Автор

how long did it last? did it hold up? was it easy to refresh?

blueskiesnm
Автор

I used the outdoor oil on a pair of adirondack chairs that I made out of white oak. Put on two coats, waiting 24 hours in between coats. The chairs are on my concrete patio and after a rainy day I noticed that the oil was bleeding off the chairs and staining the concrete. I have no idea what would cause this.

carlalbert
Автор

Hi, What type of wood were the windows and did the oil have a tint in it or was it clear?

jasonkeller
Автор

love that favorite piece of beautiful wood!

paulaiaco
Автор

Can this oil be used on an interior teak floor?

robertsoobramani
Автор

I think I would have put the thinned version on first so it will penetrate the wood and cure a little faster... by the time you read this, you will probably have a good idea of how the product really performs... thx...

EMTdrummer
Автор

Are you able to use a topcoat on these to increase the longevity of the finish?? Refinishing every 2 years sounds terrible haha

skullwhitedesigns
Автор

Does the finish you put on your windows have copper in it for pesticide control?
wonderful. I cant imagine how much custom, mahogany wood windows cost!

persebra
Автор

I'm doing an outdoor bench in white oak and decided to try this out. I noticed that after two coats I have a texture or at least more of a rough surface compared to the nice smooth finish surface I had after sanding. I sprayed the first coat on with an Earlex 6003 then wiped the second coat on with a rag. I made sure to wipe excess off after each application. What am I doing wrong to not get a nice smooth surface? Should I use a scotch brite then lightly apply the final?

Scrmnegl
Автор

where did you order your glass from Dan?

RubenFletcher
Автор

Lmfao this is EXACTLY how I'd have plugged General finishes oil for them too *wink wink wink*

love your vids keep up the great work x

hayleyjones
Автор

you broke your cam time for an other drink

jesteris