How to Replace an Electrical Outlet | The Home Depot

0:00 How to Replace an Electrical Receptacle
0:18 Tools and Materials
0:25 Step 1: Check Outlet Power with a Voltage Tester
0:38 Step 2: Turn Power Off at the Breaker Box
0:49 Step 3: Remove Receptacle Plate
0:57 Step 4: Identify the Wires
1:18 Step 5: Disconnect the Wires
1:32 Step 6: Install New Outlet

*The signs that you need to consider replacing an electrical outlet can be pretty clear. The outlet may have a cracked faceplate or feel hot when you touch it. You might see a spark or smoke or notice a burning smell. Maybe a plug won’t stay in the outlet or items plugged into it don’t seem to be getting power.

Before proceeding, make sure you are comfortable working with electrical wires. Ensure the power is turned off prior to working with electrical. Check local building codes to make sure this is a project you are allowed to complete yourself. Call a licensed electrician if you are unsure of any steps within this video.*

#thehomedepot #HomeImprovement #diy

About The Home Depot:
How doers get more done. We’re helping doers in their home improvement projects. Now you can take on more renovation projects with more know-how. Our step-by-step instructional DIY videos and expert advice will give you the confidence for your next project with hands-on learning. It’s a good time to be a doer.

How to Replace an Electrical Outlet | The Home Depot

[KJ-vcsw]

I've never been so thoroughly instructed on the finer points of outlet replacement. Now if I can just remember where I put my box of paperclips.

[ddobrien]

"The amperage should match" ...and HOW do we do that Home Depot?

[receeb]

This is very helpful! Thank you for sharing!

[pranayrkr]

I am gonna try it out today let’s see how it goes. Also how do i tell if i have 15 amp or 20 amp

[RodKauffman-zp]

I wouldn't plug something into it as it could of lost its neutral connection and the appliance wouldn't work but you still would have power. Voltage tester is best option to make sure circuit is dead.

[carlosmachuca]

If my breaker switch says 120-240v what kind out outlet do I buy to replace the old one?

[austinartist]

If you have a plug in power tester why would you want to plug something in it to see if it turns on? Just seems like an n unnecessary step. Very informative video

[TreesOnTheBeach]

Don't you have to worry about polarity and getting the right wire on the right connector?

[angelfejjanonuevo]

Dont forget to wear appropriate gloves for safety

[venividivici]

Should have put black tape around the outlet. It’s a metal box.

[paulklote]

Those j hooks are pretty sloppy. To much insulation has been stripped off.

[ravinderavnoor]

HEADS UP, very important to split tab between hot terminal screws only in the kitchen receptacles.This video by Home Depot is not right. He is showing it wrong way.

[PromNightDumpsterBaby]

How do I figure out if it's a 15 or 20 amp outlet? Is it ok if you use a 20 amp outlet if you don't go over 15 amps?