Do-More PLC Example Program Start Stop

The start-stop circuit is one of the frequently used ladder logic circuits. A normally open pushbutton start is used through a normally closed pushbutton stop to start the motor.
The motor output is then used to seal in the pushbutton start. This way the pushbutton is only momentary and the motor output will keep it bypassed.
If the stop pushbutton is pressed, this will open up the circuit and turn off the motor output.
The physical operation of the inputs and outputs (IO) is used along with the visual monitoring of the ladder logic code. You can see how this circuit works.

Programming and examples of the BRX Do-More series can be found at this URL:

General information on the BRX Do-More series of controllers:

There are also system configuration tools that will calculate the power budget, I/O count, and price.
BRX Do-More PLC Configuration:

There are several reasons why we are using the BRX Do-More Controller. Here are just a few.
– Standalone PLC with built-in I/O
– Built-in Data Logging
– Communication ability – Ethernet Port, RS232, RS485, USB – support for protocols such as Modbus RTU, Modbus TCP, ASCII, K-sequence (DirectLOGIC users), Custom Protocols (ASCII over serial, TCP or UDP over Ethernet)
– Built-in Analog input and output
– Integrated motion control
– High-speed counters
– Powerful instruction set (Video of Instructions in software)
– Ability to expand the system with a variety of modules
– Part of the Do-More series of PLCs which use the same free software. (Do-More Designer)
– Integrated simulator in the software capable of external communications for testing

#shorts
ACC Automation

[ACCautomation]

Programming and examples of the BRX Do-More series can be found at this URL:
Garry

[caulist]

Good friend how to program in the Onrom clp with the COMPARE and MOVE function, alternation of 3 pumps and in case of any defect the other two take turns?
Grateful