We machined threading, drilling, and chamfering in one tool! #cnc #machine #engineering

■Product : MTECD0604C140.8ISO AH725
■Cutting condition :
Vc = 70 m/min
fz = 0.07 mm/t
Size : M5 X 0.8
Depth = 10 mm

■Work material : Gray cast iron

#cnc
#machine
#engineering
#tools
#ev

[TungaloyCorporation]

■Cutting condition :
Vc = 70 m/min
fz = 0.07 mm/t
Size : M5 X 0.8
Depth = 10 mm 

■Product : MTECD0604C140.8ISO AH725

■Work material : Gray cast iron

[voltvolt]

Пока непоказали нарезание резьбы думал что это какая-то навороченная кисточка для туши для ресниц.

[rextransformation]

In the previous company I've worked for my boss has used this tool but from another brand. For those wondering, the other brand has two or three lateral slots for air to be blown for chip evacuation.
Very useful for hardened steel (even >56 HRC, 1.2343 or 1.2842), although prehole has been drilled to lengthen THIS tool's life expectancy. It's not necessary because it's designed to work without preholes.

[vladislav]

Работаю на производстве и всегда был убежден, что резьбофреза работает после сверла. До тех пор, пока не сломало сверло, а резьба была нарезана😃. То есть не было предварительного отверстия, а резьба есть, отверстие сквозное, резьба получилась глухой. Удобная и удивительная вещь! Премию разработчику данной технологии!

[shawnclements]

You can see when the tool gets pulled out, you ate up about half the thread material on the left side 😂😂

[Loster_SYNTH_PUNK]

Wow! And the real cool thing is: As long as the thread has the same pitch, you can cut several different thread diameters with this one tool! Great!

[kriswelsh]

Love this, and unlike a tap if this tool breaks in the hole it can be extracted quickly and easily and without turning the air in the shop blue.

[andyscott]

What an amazing tool. I love how far machining has come in the last 100 years. The maths behind producing that threaded hole must be so complex yet it’s just a tiny fraction of the entire machine. Brilliant!

[AntonChestnut]

Now that cutter, is a fucking beautiful thing!!
A thing of beauty is a joy forever. ❤

[Gerasimov]

Где деньги Зин?
По новой технологии резьба 5м = 100$ + оборудование.
По старой технологии 1 сверло+метчик 5 мм = 2$ + ручной механический инструмент.
Почувствуй разницу! 😂

[angrycod_yt]

If it comes out the same way instead of just pulling straight up, that's would be the golden way to do

[Cjmatthews]

I absolutely love this cnc stuff it hypnotises me my wife thinks im weird id rather watch machines then play bingo and yap yap yap about people 😂

[deletthis]

Drilling the screw in sounded like V.A T.S. mode in fallout haha.

[гарганопс]

Ну, конечно, механизм машинной подачи показывать не обязательно

[umitikiz]

Is there a machine that will provide eccentric movement? Or is the screw self-eccentric? this is important

[cayankeelord]

That is amazing! Man is such a clever primate! Big brains and opposable thumbs make all things possible.

[alexanderdooley]

but does the cost of the tool and the durability of the tool justify the replacement of just milling or drilling the hole and using a tap?

[failureOnSnow]

I was fully convinced they were gonna try it with the pen next and now I want my minute back

[neyrolog]

Просверлить и использовать метчик проще, чем искать резьбофрез.
Если нужно сделать отверстие в форме цилиндра, то можно и цековкой воспользоваться...

[Drunken_Hamster]

Now THAT'S what I call innovation.