Programming ATtiny10 with USBasp Programmer

🛠 Tools which I use in the video 🛠
➟ ATtiny10
➟ SOT23/SOP10 to DIP10 Adapter
➟ USBasp Programmer
➟ 10-Pin to 6-Pin Adapter
➟ 10-Pin Ribbon Cable
➟ Small Breadboards
➟ Dupont Wires

Stay creative and keep on tinkering 😊

[mnad]

Am I missing something? The "verification" via reading then writing the Flash content of your ATtiny10 shows "Flash is empty, resulting file has not contents" and "0 bytes of flash verified", respectively (at 3:23). While this is consistent, I would think that writing NOTHING does NOT prove that the reading and writing actually works? I haven't tried your approach yet, and think it might well work, but that's odd, no?

[j.j.cgoutham]

can I use arduino as ISP for the attiny10 with avrdude?

[denishodovic]

Gibt es eine Möglichkeit usbasp zu nutzen in der arduino ide, und damit den attiny10 zu programmieren ?

[DiyintheGhetto]

Hello, I did manage to programming the attiny10 I been having a hard time trying to figure out an project for this micro processor. Led blink is great.

A friend of mine gave me a few of them 20 of them. I just don’t know what to do with them.

[danp]

Hi,
I have some Attiny10s on the way. I'm trying to set things up ahead of time. Where are the Environment Variables your changing about 2.22? thanks for the videos.:)

[WistrelChianti]

Quick question and no worries if you don't know, (going way beyond the video scope here!) but is there some sort of de-compiler that can be used once you've read the flash memory to figure out what the code does? Appreciate there is always the old "do it the long way" method of course. Also I note that it seems to guess at the chip type based on the "signature", out of interest, does it still guess correctly/work if say you got the "command line specified" chip type wrong? i.e. you put 5 when it was a 4 say?

[electron]

Is your TPI setup the same for programming the ATTINY20? Thanks!

[DiyintheGhetto]

Sense they are using spi to program them. We can use another arduino to program them?

[angelrobles]

can be programmed with atmel studio once usbasp firmware is updated?

[habbygb]

hi, can you leave you contact email?
i can't use usbasp connect the attiny10.can you help me, thx