BEHR® Paint | How to Paint Kitchen Cabinets

Give your kitchen a fresh new look by painting your cabinets. Learn how to do the job like a professional with these simple steps.

Featured color: English Channel PPU14-19

[geritavares]

Use TSP a deglosser to clean. A portion to a gallon of water. Behr has a new self leveling paint for cabinets called CABINET TRIM AND ENAMEL. You should also use a foam roller to put the paint down. It is self leveling so no brush strokes.

[lindagarza]

This is awesome…it’s going to be a labor of Love. ❤️

[cletocuevasjr]

Wish I had found this years ago. My wife had me use “chalk paint” to paint the kitchen. What a nightmare it was. Never again using it. Lol

[marniemonfort]

Everyone do some research at your local paint department. Tell them how big your project is, location (kitchen, bathroom, etc) they should be able to guide you on the proper Paint type. I always recomment to get a paint and primer in one product it helps on coverage and time. Most products require at least 2 coats. If you are doing a primer base first...thats 1 coat of primer then its usually recommended to still apply 2 coats of paint...(Lots of work that way. Let each coat of paint dry at least 24 hours between coats to prevent bubbling or peeling

[cxzytfr]

Please do not take this video as a reference, there are many points and factors not covered. If you do not like the result, it could end up costing you more to pay a professional to fix it than simply hiring someone from scratch (especially for kitchens).

[itsmeyouknowwho]

It doesn't look like you removed the drawer 'fronts' for this project? Did you just remove the whole drawer and paint the front while still attached to the drawer? 🤷‍♀

[alicefayenjbj]

You did a great job on the vanity. It reminds me of my grandmothers old vanity. I would use it as a desk or a makeup vanity. Just add a standing mirror.
My dad and I refinished a 1950’d Lane Cedar Hope Chest. Stripping off all the water damaged veneer and bringing out the worm wood cedar. I’m so glad you didn’t pair over the wood.

[hughmc]

What motor you.putting in the SEMA Camaro ?

[templeton]

Haha if only painted cabinets actually looked that smooth using a roller and brush, I foolishly did this and ended up needing to repaint everything with a sprayer to get a professional smooth look.

[markthomas]

Maybe two coats? If you are using Behr you will probably need three.

[Droopy]

I also simply unplugged the circuit board, waited a few seconds and plugged it back in. Currently working again !

[lafem]

Why weren't you around a few years ago when I looked everywhere for this "How to"?

[haroldclark]

Looking at the top of the drawer doesn't look smooth at all

[enyerlynparra]

I just bought my paint to paint my kitchen cabinets, my question is, they previously had a brown color and we sanded them, would we have to apply primer or just the paint?

[chelin]

How about a protective coat? Is it needed?

[craigmines]

O well just paint them find color you want a paint ok

[JoseRamirez-kpcr]

I will call thi how not to paint gabinets

[MikeHapner]

Step 1: never consider Behr for anything you want to look nice

I took a chance again after 20+ years of only trusting Sherwin-Williams.

Nope - Behr is still horrific

[ArtisanStoneworks]

Your video showcases some beautiful stone tables! I specialize in crafting a variety of stone table designs, particularly for European and American clients. If you're interested, feel free to contact me for more details!