SKAGEN Watch Battery Change and Bezel Remove Instruction

**SKAGEN Watch: Battery Change and Bezel Removal Guide**

**Introduction**

This guide provides step-by-step instructions for changing the battery and removing the bezel of a SKAGEN watch. By following these instructions, you can ensure that your watch continues to function properly and maintain its aesthetic appeal.

**Materials and Tools Required**

- Replacement battery (check the watch's user manual for the correct battery type)
- Small Phillips-head screwdriver
- Flat-head screwdriver or pry tool
- Soft cloth

**Instructions**

**1. Battery Change**

a) Turn the watch over and locate the small screws on the back cover.

b) Use the Phillips-head screwdriver to loosen and remove the screws.

c) Gently pry open the back cover using the flat-head screwdriver or pry tool.

d) Locate the battery inside the watch. It is usually held in place by a metal clip.

e) Carefully remove the old battery by gently prying it out with the flat-head screwdriver.

f) Insert the new battery into the watch, ensuring that the positive (+) side faces upwards.

g) Secure the battery in place with the metal clip.

h) Replace the back cover and tighten the screws.

**2. Bezel Removal**

a) Locate the small screws on the bezel of the watch.

b) Use the Phillips-head screwdriver to loosen and remove the screws.

c) Gently pry off the bezel using the flat-head screwdriver or pry tool.

d) Clean the bezel and the watch case with a soft cloth to remove any dirt or debris.

e) Reattach the bezel by aligning it with the watch case and pressing it down firmly.

f) Replace the screws and tighten them securely.

**Conclusion**

By following these instructions, you have successfully changed the battery and removed the bezel of your SKAGEN watch. Remember to refer to the watch's user manual for specific instructions and precautions related to your particular model.

[florinsgondea]

Thanks for the best instructional video I've seen so far: doing the wrong way and the wright way. I really appreciated. Thanks again.

[albertmoton]

I have the watch that has screws on the back of the watch. But I just need to know how to take back off and put a new battery in it.

[rb-csqo]

Thank you for the outstanding video. I was trying to repair a friend's Skagen and couldn't figure out how to remove the bezel...until you showed me how in your video! Thank you! I had all the right tools...just couldn't figure out where my "in" was. Thanks again for your help.

[arthurbaldwin]

Thanks for a clear easy to follow video. Now even I would be confident to try doing it.

[wadeshimoda]

Hi, thanks for the very helpful video. Could you please explain what you’re using and doing at 2:36?

[tyren]

what's the step at 3:06? I don't have the gasket greasing pad, can I put the cover back on without doing this step?

Thanks

[isabelvitela]

What size is the battery? I can’t see the number on the battery I took out even with a magnifying glass.

[royalclipper]

What is the name of the (blue) tool you use to remove the watch back? I would like to get one. Thank you.

[carlmanu]

Having the hardest time pressing the caseback but no luck. Not sure what I’m doing wrong with these Skagen watches.

[ferozeahmed]

How to open bezel for Skagen Hald model no SKW2741

[crelizalde]

my watch skagen didn't work after changing the battery, can you help me?