iPhone 6 Plus TouchScreen LCD Digitzer Troubleshooting. TouchScreen wont work.

[davidbui]

This worked for me! Thanks a lot. I went to apple after reading on the forums about other people having this problem and they wanted $329 from me. I walked out and went directly to youtube and found your video. Keep up the good work!

[hakansterner]

This video clip is exceptional, should be the first instruction you try when experiencing troubles with unresponsive touch screen! It captures the tacit knowledge known only by experts, and you show this extremely convincingly! Very well done Sir.

I managed to repair my mother-in-laws iPhone 6 this way today and it took like 30 minutes for a complete newbie. The only problem she experienced was that the letter ”y” and ”6” did not respond on the screen keyboard, a very localized but annoying dead spot. So I just disassembled the screen contacts, inspected them closely, corrected the slight curvature found in some of the contacts. Cleaned the contacts with a slight touch of a cotton swab moisturized lightly with some isopropyl alhohol to get rid of any contaminants from my skin when straightening the cable contacts. Just for good measure.

This is the very first time I ever tried to get to the inside of a smartphone, the proper opening procedure was found elsewhere but very simple in the case of iPHONE 6; a suction cup and some guitar-pick like plastic bending tools, careful with the upper side and not opening more than say 90 degrees. Had to get a repair kit with the proper screwdriver heads and suitable opening tools of course, prying tools were all made of plastic and worked perfectly.

Result: perfect function on first attempt, thanks to your excellent instruction to get a feel for the correct installment of the contact strips that is signified by a tactile ”snap”. Many thanks!

[srirao]

This was perfect after swapping my battery. None of the other videos explain how these connectors might get bent! Thank you so much!

[trollmaister]

Great video and good advise. It is so important to ensure those ribbons attached to the display connect properly and securely. While replacing my iPhone 6 battery, I had numerous attempts to get my iPhone to work only to find "white lines" across the display as well as unresponsive screen not accepting any commands. After looking at your video, I went back to the "drawing board" and closely looked at the ribbons; spray compressed air and push from left to right, display ribbons as well as the digitizer. After snapping them firmly, the display came back and the phone recovered all its capabilities. The most critical part after the firm connecting of the ribbons is to place the extremely small and difficult to manage screws that cover the plate above the ribbon connections. This took me the longest. Thank you for posting this very helpful video.

[dgarage]

This worked for me. Had no touch what so ever. Looked at the cable and saw that there was a pin that was bent. Fixed it bug still has a slight flicker on the screen. But this video helped a lot. Cheers mate 👍👍👍

[tokenvillain]

Great video. I fully appreciate your posting this and taking the time to be thorough in your explanations and demonstrations. It took me far too long to find someone that could show me why my touchscreen wouldn't work. I knew there was something small I was missing and this hit the nail on the head. Thank you.

[Iamtheartists]

Took me a few try’s - that long connector just would NOT click in - this definitely helped . It never fully “clicked” but got it to work based on your suggestions - thanks !

[akihcortez]

brooo its 2024, and this method is 100% legit thankyousomuch for saving my iphone 6 backup phonee brooo

[neil]

I see comments from people with unresponsive or intermittent touch. If your display has not been replaced and you have intermittent or no touch it could be from the phone being flexed or dropped and the touch IC chip has a fracture in one or more of the solder balls. The iphone 6 and 6+ have this issue more as underfill not used on the IC's. This video is excellent for the issue where you replace the display and touch doesn't work or you have lines. Take it out straighten the flex gently and as instructed make sure it seats evenly when trying again. I have done hundreds of these and every once in a while this happens and I have to do exactly as he shows in this video. And if having a really bad day might have to do this a couple of times to get it to seat right.

[edu..]

You definitely saved me stress, time, and money. May the universe bless you, brother!

[willj]

This just totally saved me from replacing my out of warranty iPhone. I live in China and the guys at the particular phone repair place near me are known for stealing parts and swapping out the battery. Glad I didn't have to go there. Thanks a lot!

[JoseDoubleG]

bruh! god bless you! I've been spending so much time trying to figure out why the touch screen wasn't working after I replaced it. After this video, I went back and reconnected the screen a few times until it worked. Thanks!

[fihannijer]

Tanks man u helped me alot and because of you i fixed my iphone in 3 minutes

[rodericksilla]

Perfect! This tutorial video save me after I watch it. The touchscreen of my iphone work like a charm thanks man!…🤗👏👍👍🙌

[Geoxyyyyz]

Ommgggg.. love you so much
I cant explain how happy i am😃😃❤❤

[RomeohRamone]

thanks soooo much this saved me sometime trying to figure out why I replaced the phone with new screen but wasn't getting any successful screen touch, once I followed your video I managed to get the phone working

[samli]

thank you much i fixed my phone, i'm so happy keep doing the good things to help people god bless you bro :)

[neil]

I do iphone repairs and through experience learned that what you are showing is accurate. Good job!!

[grantcopeland]

This was exactly how to fix my touchscreen after doing my own lcd screen replacement. Thanks a bunch

[zc]

You are genius, guy. I repair my phone use this method.