how to fix a start job is running for wait for network to be configured

The ACTUAL solution is to set the adapters to optional, removing the need of an active DHCP lease or other services on the interface.
if you use a radhat based distro:

[ThomasKeffer]

Worked beautifully for me. The problem was that the system was waiting for an unused ethernet connection to come up. This fix tells the system that it's optional.

Thanks!

[rafa]

My man, i was looking for this quite long, thanks <3
I'm using ubuntu server distribution and had problem wity openvswitch and wasn't able to apply changes. In this case i just installed openvswitch and everything works now, computer reboots now in like 30s or so.

[MyName-tboz]

Good information but this wasn't the problem in my case. I have two physical NICs on the MB. Only one has a cable connected but both have: dhcp4: true set. The solution in this case is, though I haven't tried it yet, to set the NIC without a cable connected to 'false'. Or I'm assuming that's the case.
I'd also mention that I would think that setting the adapter to 'optional' is going to cause some serious issues if you have NAS drives mounted with nfs. Particularly if you have your /home/<user_name> directories on a NAS. Those can't be mounted until the network is 'up'. If it's taking a long time for your network to come up you have problems other than this one.
Great info on where to find the relevant file, though. Honestly, that's usually most of the problem when you're trying to correct something, "What file do I need to edit to fix this?"
Thanks for the useful info!

[vinaymoturi]

I was trying to solve this since somany days. excellent solution thank you very much😀

[hatemsaied]

Worked for me (Ubuntu server 23.04). I am using WiFi and the system was waiting for the unconnected ethernet port to come up with a connection.

[SierraYankee]

the .yuml file was named differently for me, however it was the right solution. ty

[GRTSshorts]

Hello sir
When I put all that code my system say new file or new line
It didn't show like yours
Six line
Help me

[LinuxBrother]

I don't have 00-installer-config.yml

[rango]

Thx alot 🙂, this fixed my slow ubuntu clone vm boot.

[martaas_cz]

bro thx a lot, my ubuntu server now starts 5x faster xd

[wrecklass]

Unfortunately this doesn't fix the real issue. It just tells Ubuntu it doesn't have to have that network. If that is the only network connection you have and it is not working for some ??? reason, this just leaves you with no network at all, still.

[_nathan]

hello i'm on rocky minimal iso and when i do ctrl alt delete and hold shift after i don't see the recovery mode is this normal ???

[GRTSshorts]

Hello sir do I need internet connection while doing this

[ARSALANRATHER]

When I try to boot my ubuntu, it sticks at the loading page and shows "A start job is running for load kernel modules"
How to fix this issue

[mr_dunkel]

This fix does not work on Ubuntu 23.04!

[gunjanpanchasara]

After ctrl+x when I wrote what you said there was an error saying version 2 not found or undifind

[yashwantdewangan]

0:38 Holding Shift key to get recovery mode is not working

[oginsights]

I don't even have a netplan folder. Is this only for ubuntu?