3D carving on desktop CNC from OpenBuilds

Hi Guys!
Below you can find few ways to support the channel...thanks:

CNC router Bits (Starter kit)

My Etsy store:

My patreon page:

OpenBuild CNC machine:

OpenBuild probe:

OpenBuild store:

Email @:

Second channel-FALCON390 Workshop

.......................................................................................................................
Information about the toolpaths from my CNC project:

Toolpath: 3D Roughing
Toolpath Info
Time Estimate: 00:16:50
Toolpath Type: Rough Machining Toolpath
Feed Rate: 2600 mm/min
Plunge Rate: 381 mm/min
Spindle Speed: 18000
Tool InfoTool Name: End Mill (6 mm)
Tool Type: End Mill
Tool Number: 1
Max Cut Depth: 14.817mm
Pass Depth: 3.5mm
Stepover: 4.8mm
.......................................................................................................................
Toolpath: 3D Finish 1
Toolpath Info
Time Estimate: 01:14:24
Toolpath Type: Finish Machining Toolpath
Feed Rate: 1500 mm/min
Plunge Rate: 700 mm/min
Spindle Speed: 18000
Tool InfoTool Name: Ball Nose (2 mm)
Tool Type: Ball Nose
Tool Number: 1
Max Cut Depth: 14.837mm
Stepover: 0.2mm
.......................................................................................................................
Toolpath: Outline
Toolpath Info
Time Estimate: 00:02:30
Toolpath Type: 2D Profile Toolpath
Feed Rate: 3000 mm/min
Plunge Rate: 700 mm/min
Spindle Speed: 18000
Tool InfoTool Name: End Mill (4mm)
Tool Type: End Mill
Tool Number: 1
Max Cut Depth: 18mm
Pass Depth: 4mm
Stepover: 3.2mm
.......................................................................................................................
#CNCrouterproject
#DesktopCNC
#OpenbuildsCNC
#Woodworking

[FALCONCNCWorks]

OpenBuild CNC machine🤖

CNC router Bits (Starter kit)

My Etsy store 🛒


My Email ✉

[deantaylor]

Looks great, i love the stain.i would tram your machine in a little to get rid of those undercut lines you see on the outside of the model. I have these problems with my machines when ever i do some maintenance on them.

[JohnColgan.]

Beautiful carve, wood looked like maple? love the finish, what was in the oil?

[martf]

Good job, but personally I would have the endmill clearing the field in the same direction as the grain.... That's just me.

[forrestgumpv]

That is not a desktop cnc router. Unless you are