Woodcarving a tiger on CNC router from Openbuilds.

Hi Guys!

Video shows me making 3D relive in sapele hardwood.
I wood carved a tiger. Design was purchased from Ebay...

🔔 Subscribe for more CNC and woodworking videos just like this🔔

✅CNC I recommend✅

✅Router bits I recommend✅

🤝HELP SUPPORT THE CHANNEL 🤝

✅ For inquiries contact me at:

.....................................................................................................
CNC router job setup info:

Toolpath: 3D Roughing toolpath 6mm Endmill CNC router
Toolpath Info
Time Estimate: 00:20:49
Toolpath Type: Rough Machining Toolpath
Feed Rate: 2600 mm/min
Plunge Rate: 500 mm/min
Spindle Speed: 18000
Tool InfoTool Name: End Mill (6 mm)
Tool Type: End Mill
Tool Number: 1
Max Cut Depth: 14.992mm
Pass Depth: 3.5mm
Stepover: 4.8mm

Toolpath: 3D Finish toolpath 1mm Bullnose bit CNC router
Toolpath Info
Time Estimate: 05:42:29
Toolpath Type: Finish Machining Toolpath
Feed Rate: 1500 mm/min
Plunge Rate: 700 mm/min
Spindle Speed: 18000
Tool InfoTool Name: Ball Nose (1mm)
Tool Type: Ball Nose
Tool Number: 1
Max Cut Depth: 16.658mm
Stepover: 0.1mm

..............................................................................................................

#CNCrouterproject
#DesktopCNC
#OpenbuildsCNC
#woodworking
#cncrouter

[FALCONCNCWorks]

🤝HELP SUPPORT THE CHANNEL 🤝

✅CNC I recommend✅

[RetroCCTech]

Yup, resort to the basics, hack and re-try! We all learn from experience! I really need to build my CNC. Have a 3018, modified but not working yet, MPCNC, printed, but not built and a Lowrider 3, waiting for the 3018 to work. :) It seems a circle of dependency, but I'm getting there!

[JasonTira]

Fantastic recovery, I though for sure you were going to have to start over.

Why don't you zero on the stock itself?

[storytellerHD]

Hmmm. So the total machining time took a little over 6 hours? Is there a faster way to execute the finishing tool path? Thanks for sharing.

[CustomGraphixWoodworx]

Do you make your own files or do you purchase them?