GE dishwasher pressure switch issue not washing not filling up or draining continuously H2O error

GE dishwasher not washing not filling up with water or H2O error pressure switch replacement

[johnnyred]

Brother, thank you, you saved me time and money, fixed my dishwasher with this video

[SamuelLeivaEntrepreneur]

Excellent video! In just one minute, it demonstrates how to remove and clean the necessary parts. Other videos tend to be too talkative and lack focus. Thanks to this video, I was able to fix my dishwasher that was displaying an FED error. Thank you!

[sonyamochegova]

Thank you for the clear video and instructions! I had a repair guy come out twice, and he wanted to replace the main board and the control board at over $400 (at which point I could get a new dishwasher), but my dad thought it was the sensor and sent me the part and your video. I have petite hands, so I was able to pull out the dishwasher about 6 inches (after turning off power of course), and reach it through the side. It worked! For anyone having the issue, I was not getting the H20 error and all diagnostics were coming back normal, but it would periodically get stuck on drain cycle, at the beginning or in the middle of the cycle.

[janethorpe]

Thankyou.... That was my issue. My GE Dishwasher would turn on and try to drain for over 1 minute and then shut down. It ws my pressure switch. It looked like yours..the hole was clogged. I cleaned it out and re-installed and when I turned it on it started to drain for 1 second and then switched to fill. FIXED!!! Thank you.

[jasongroen]

Thank you! I never had the H20 code, but my GE kept trying to drain continuously and wouldn't fill up at the start of a cycle. Cleaned up the pressure switch and it started right up.

[charleslambertjr]

Thank you for taking your time to make this video, I’m working on the exact same model, it would not fill with water / it’s only two years old- I removed this part and I saw a lot of slime inside so I am going to purchase one of these today and give it a shot / I almost purchased a control board because I thought it was faulty- I really appreciate you 😎🏁

[SegaCDUniverse]

Thank you. I think this fixed my h20 error. It was filled with gunk!

[CaptBill]

Pretty sure this is the problem on my two year old GE Dishwasher that is stuck on drain mode when I push the start button. Got a replacement coming. My research for a DIY fix says the other possible issue could be the control board. I go with the easy fix options 1st. Thanks for the lesson. 🙂

[CaptBill]

Likely the same problem on my 2 year old GE Dishwasher that gets stuck on drain mode when initiating Start of wash cycle. My research for a DIY fix says if that does not fix it, ... then try a new control board. Thanks for lesson.

[quentincopeland]

I reinstalled mine but I still have a leak should I buy a new one

[kevinkline]

Mine does not throw the H2O or FTD codes. It’s code PRS; still going to be this pressure switch issue? When I reset the device “32” code shows also.

[simnewhousedoctor]

What happen if diagnose H20 replace the pressure swith still same diagnose what is the other problem