2014 Nissan Sentra Transmission Removal and Installation Tips and Tricks

I am responsible for doing pretty much all of the C.V.T. transmissions at my work. Nissans make up a lot of that work and I have gotten pretty good at removing and replacing them over the years. I thought i would make a tips and tricks video on this 2014 Nissan Sentra. Hopefully it is helpful and thanks for watching. Check out my channel for more transmission and other content!!

[WilliamCogswell]

This guy is awesome. He tell s you the pain in the ass stuff. No bull. That’s a perfect video. Thankyou.

[JasonLee-lvtm]

For the top starter bolt, I ran an 18mm swivel on an extension between the intake and the alternator from the passenger side of the engine and it saved my knuckles

[julabi]

Thanks for posting this video. I don't need it but Nissan replaced my transmission about 2 years ago. I know it's only a matter of time before I need to do it again myself.

[JasonLee-lvtm]

Excellent Video Sir,
I didn’t quite beat your time but I started around 10am and was finished by 4pm
First Sentra Transmission I’ve done

[kylewonner]

Good tips. I pulled the fan out which took about 10 minutes which made the starter and torque converter bolts way easier to get to. Done in 2.5 hours.

[davethewave]

Thanks. As a mechanic this is the help I needed.

[luisontiveros]

I know this video is a bit old but by chance when installing the cvt transmission do you need to reprogram the transmission? I’ve been seeing a lot of people say it needs to be reprogrammed after installation. Thank you 🙌🏼

[jonathanoverfelt]

Looking to buy a 2013 Sentra on marketplace. It needs a transmission. This will be my first transmission job. Really excited

[paulallen]

Sweet. I was told I would have to get my replacement transmission reprogrammed from the previous vehicle it was in and then reprogram for my car. Have you heard of that before?

[justinbushaw]

Looking to buy a 2014 Sentra with 80k miles that had it's transmission replaced 5k miles ago. The owner says it still acts up and slips gears. I haven't test drove it yet but I am having my mechanic look at it this week. Is there anything I should ask them to check? Thanks for posting this vidya!

[xz]

Did you have to do a relearn,
Or program the new trans to the car?
We had a new transmission (purchased from Nissan )put in a 2014 Sentra. It has no power and won’t go over 20 mph.
Feels like it’s stuck on “gear”
So to speak

[duranhumberto]

Soo from the start I can relate " IF YOU DON'T SPILL A LITTLE JESUS JUICE THE JOB AIN'T BLESSED 🙏" . oh the tiny hands that put the engine together 😅 .thanks for tips very helpful

[mechanicalman]

Quick question on the transmission module. I am using a used transmission. Do I use new module or old module from original car.

[DreamCatcher]

I have a 2014 Nissan Sentra. It had a transmission replaced due to an accident the first year of the car and a second transmission in 2021. It recently broke down with the following codes: a P0746- pressure control solenoid and P276- turbine speed sensor. I am told I need a new transmission. Financially it is the only thing I can afford. Is this a terrible decision? Is there advise you can give?

[MikelJacks]

Thanks for the video man, I just noticed the same hole in my 2014 sentra (in your index finger, near this point in the video 3:48), do you know what is it? Is something missing there?

[slimsqde]

really great and helpful video, thank you!

[sheepdogwatchnyou]

Hey Dylan.. I got my Reman trans (from Nissan) put in My 2013 Sentra.. I did notice the fluid level was below the dipstick tube .. can you advise on how much fluid is required to add ?
Thanks for your videos! LOTS of very useful information! 👊

[atour]

Just subscribed and my question is that the frame has to be removed in order for the transmission to come out I had a 07 and man it was a hassle

[TuttleCreative]

Neighbor is selling 2015 Nissan Sentra fro $1000 with “bad transmission” . They are elderly and not car people so let’s see what we’ve got. Going to look at it this evening and had to look a a YouTube video to see if I’m up to the task. I’ve done a maxima before so I think I’m up to it

[pneusmecaniquetemis]

We operate a shop here in Canada, and my local dealer is telling me that I need for around 500$ of gaskets and oil. I know that oil is pretty expensive, but which gaskets are involved in that job?