Allen Bradley PLC Sequence SQI SQO Programming Tutorial Part 9

In this lesson we are going to show how to program Allen Bradley PLCs to use the SQI Sequencer Input instruction and the SQO Sequencer Output instruction to track machine sequence steps. One key advantage to the PLC programming methods in this series is they work with all Allen Bradley PLCs including the Controllogix and Compactlogix with Studio 5000, formerly RsLogix 5000, RsLogix 500 for the SLC 500 and Micrologix PLC, and Connected Components Workbench for the Micro800 PLC. In fact these methods work with most all major PLC manufacturers.

Items used in this video:

The above links make these videos possible. Please use them!

[Justinsatiable]

I've been programming for 20 years and I've rarely seen sequencers implemented but I've seen a dozen sequencing methods that are much more coherent and readable by the average maintenance person.

[blackviking]

Thanks for the great tutorial, Tim! Your channel always turns out great content.

[sloppyjoe]

I’m learning how to program sqi and sqo at work right now because we have alot in the programs but they are also inside an aoi lol.

[jorgef.morales]

I can't find SQO instruction on Connected Components Workbench... :( Could you help me?

[Futbolnews]

Hey Tim,
I think you will not be able to show #12 with your finger :)

[Jay-trpx]

Thanks again for this tutorial. I was wondering if you can make a video tutorial about using a GSV or SSV wall clock to schedule some maintenance PM schedule to run a motor?? And to record start, stop and fail in that program??

Thanks again Tim.