My New Business Makes $3,000 Per Day | THE HANDYMAN BUSINESS |

#thehandyman? #thehandymanbusiness #smallbusiness

[imout]

Well i gave up the handyman business. It was good to me but i used my profits to build a 20 acre rv park and develop a dumpster rental business. So long handyman, I learned a lot from you.

[blairliptak]

I am a Journeyman HVAC technician and I am very impressed with his technique of this installation he did everything correct the only thing he didn't use is a micron gauge to prove 500 microns but I believe with running that pump for 45 minutes and proving a good pressure test he was fine

[wcraft]

"Decision Paralysis" is a real thing. Steve Jobs was famous for always wearing the same black turtleneck and jeans everyday. When asked about it, he said he did that to keep his wardrobe options simple - a few less decisions to start the day. It might allow for one or two larger decisions later on.

[jknocal]

You can make a jig out of plywood that will make starting your hole in the brick way more easy and precise . It's just a piece of plywood with a hole the size of the bit that keeps it from walking on you

[chadjelliston]

“The paralyzation phase” that can’t be more true. I’ve always tried to find a word for it when you’re so busy you don’t even know where to start. Or, you try and make a few people happy but don’t have enough time to do them all so you do some of each. Great video!

[GladYouMissed]

I installed my own from amazon, glad I saved 3, 000$ :D!

[watomb]

I’ve put in a couple when customers ask. I don’t have the overhead of maintaining warehouse or crews. One thing the control board is expensive so I install surge protector at quick disconnect

[jdshear]

Don't forget to ring that...15:03 and enjoy Handyman's pure delight!

[neoamishdude]

Im a big advocate of bundling and securing your wires/line set with tape/zip ties and a bracket or two. Can save a lot of hassle in the event something bumps your equipment or bad weather beats your equipment up.

[keitho]

Lost tool time 🙄. Been there!!

That's why everything has to go back to its correct place. Time = Money

[bubalub]

You truly are the worlds greates handyman. I just dont know how you do it while married. My wife makes everything seem so impossible. I enjoy learning from you.

[billwilliamson]

Only extra tool I would have is an appion core removal tool as to not lose your vacuum or any Freon because you never have to disconnect it until you are finished. 80 bucks on amazon. Obviously you get the job done but maybe you haven’t heard of that particular tool. Just FYI

[NewVisionsTristan]

Dude my head is spinning. That's where I'm at right now. First year back in business for myself. Newer dad added on that. Work piled on and can't even get to it. Thank God just need to organize...

[Rgarcia]

Long time no post, glad you still hustling

[frankmurphy]

You could've saved time by mounting the unit on those existing command strips. You're welcome 😂

[fastidioushandyman]

Would recommend a flaring tool (to easily shorten the lineset at times) and a micron gauge but great install otherwise! We pressure test all of our AC units and minisplit installs to about 510 PSI to ensure no leaks, then vacuum down the system to about 300 microns and perform a decay test. We also pull schrader cores for faster evacuation, pressurize it to about 10 PSI of refrigerant, pull the hose and replace the valve core, and fully open the refrigerant valve.

[cliffpalermo]

Por15 2 part epoxy last tub i did, still perfect. Rust-Oleum i have had it come off with use

[JonnyDIY]

Nice job Handy, easy money 💕👏👍 I get like that too when I have two many things to do I just shutdown and don't do any for a couple days 🤣 gotta recharge and reset, rest the old brain too

[bassyaker]

I have been wanting to see someone good do an install of a mini split, thanks handyman!! Keep up the good vids! Also what are those anchors you used for the outside bracket?

[-Kreger-]

1 hour looking for lost tools :) man I really relate to that.