Cost To Start Powder Coating

This video is just my opinion on the equipment I think would be the best and most efficient way to start powder coating. The options and combinations are endless. If you’re looking to get into powder coat, do you research and ask questions! It took me many hours of trial and error to get to the point I’m at today and I still have a lot to learn.

Roughly $1200 will get you started and then you can go from there to upgrading your oven and stripping equipment.

_________________________________________

Royal Coats Powder Coating located in Spring, Tx.

281-985-1442 call/text

Want me to powder coat your parts? Reach out and we can make arrangements!

I started this channel to show my process and help others. When I started coating there was limited content accessible for powder coating so feel free to reach out to my email with any questions concerning powder coat or equipment. For more personal 1 on 1 training/advice we can set up a time and date for calls or video calls from 30 minutes to 2 hours. Click this link for more info:

Music codes:

[jerrykesselmayer]

I’ve been really wanting to start my own side gig / eventual small business for a long time and powder coating is at the top of this list, this video was awesome and informative I really appreciate you’re help. Thank you!

[salaugone]

Bro you really know how to explain things in a simple way. Awesome job

[brentlafleur]

I am powder coating tumblers and I spray a base coat of white then once it hits 400 I let it cure the let it cool then I apply vinyl decals then spray it with maroon then once it starts to flow out ( usually 2mins) then I pull tumbler out of oven and let it cool until 250 degrees then try to remove decals but more than the letters of the decal comes off it is like the letter and more maroon comes with it.

Brent LaFleur

[These-nutz]

Where I work there’s at least a 35 ft oven, it costs a half million I was told

[adrianmaree]

Another very informative video. This is brilliant. I hope your channel grows well because you make very practical vids.

[Beasthuntet]

Awesome video! I’ve been trying to find the kind of information your sharing on your channel! Definitely will be tuning in more.

[martinmcgrath]

Good information. 🤙🏼. I’m in the process of building my spray booth and 4 x 5 x 8 oven right now.

[n.e.b.laaron]

Thank you for this video, ime currently searching for the right products to use to get started! Big help 😊

[kristianirvine]

Great video and some great advice .
Keep up the good work

[porscheG]

I feel like 150-200k is a realistic budget to open a full shop. Maybe 8x8x10 oven/ booth. This isn’t including the cost of leasing

[KMLTimesTwo]

Nice video. Very good and accurate info on the costs of getting started. A year or two ago, I wanted to start powder coating. I get blast cabinet first, only to realize that upgrades are needed to keep the moisture out of air....and what I thought was a big enough compressor is maybe at the minimum for what I need. Then I get a "mid level" powder coat system and realize that I really should have a booth if I want to do this more often. (I am going to copy your filtration system into my cabinet.) Now, I am realizing that stripping is a problem! Not sure that I am ready for 5 gallons of stripper sitting around the shop though.

[cameronpresley]

My 17 year old is wanting to get into powder coating so Ive watched a few videos. Im almost 100 % sure he has watched this video based on our conversations. Most of the equipment you mentioned, he has mentioned to me. He is at work so I cant ask if he is subbed. Do you think a class is worth it? Im guessing you have to be 18 to attend a class. He will be learning before he turns 18 in December

[dwlang]

Wondering about the coating product cost and what's a good company to use?

[paulgrindley]

How many uses do you get out the rim strip and what do you do to get rid of it when it’s all used up? Thanks for the videos. They have been really helpful.

[srmichaeljosephsmith]

Great video, keep them coming. God Bless

[jeffsaylors]

If I was needing to touch up on rod iron hand rail that's been powder coated. Because a few welds had to be added. What would be the best way to touch it up if I can't put it back in the oven for repair of the areas. What is recommended for situations like that so it would be close to matching the finish grade.

[ForbiddTV]

Another necessity: A laser point temperature gun. Not expensive.

[DanTheManIOM]

does the dual voltage improve the outcome of the part ?? I have a stove that is hammered which is why I am here...

[wheelsone]

Thanks for the video, did you happen to make the other video on the next step home garage set up?
Also where does one dispose of used rim strip once it's used up or gets too dirty?
Appreciate it!
I do wheel repair (all liquid right now )so I guess that and other similar sizes will be my focus.

[bestmichael]

Please don’t go hf that’s what I started with the Eastwood is day and night been looking at the your powder gun just finished building my own oven after using a regular oven for a few years