Powder Coating Vs. Paint: Which Is Better For Your Project?

Have you ever wondered why people always rave about powder coating? In this video we talk about all the benefits of powder coating and why its great for wheels, suspension, under hood parts and so much more.

PCS-250 Powder Coating Gun

The Eastwood PCS-250 Dual-Voltage HotCoat™ Powder Coating Gun gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. This new and improved gun features color-coded cabling, larger ground clamp, increased trigger room and a clear bottle so you can see the powder color and fluidizing action.

Features:

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical
Operates on standard 120v / 60Hz household current
Versatility with two settings for improved coverage
Low 15,000-volt setting
High 25,000-volt setting for multi-coat coverage over larger areas
Increased powder adhesion
Minimal overspray
Color-Coded cables for easy setup
More trigger-room for additional comfort
Larger ground clamp
Clear bottle allows you to see powder color, level and fluidizing action
Larger internal passages for improved powder flow
Refined power supply for more consistent coverage and powder-build

The PCS-150 Single Voltage Powder Coating System brings the benefits of powder coating right to your home garage or shop.

Coat and cure in under an hour!
Easy to apply
Extremely durable finish
Quick color changes
15,000-volt output
Economical
Minimal overspray
Color-Coded cables for easy setup
More trigger-room for additional comfort
Larger ground clamp
Clear bottle allows you to see powder color, level and fluidizing action
Larger internal passages for improved powder flow
Refined power supply for more consistent coverage and powder-build
This innovative, inexpensive powder-coat gun helps you do a professional-looking powder coating job right at home. All you need to add is compressed air (5-10psi), a dedicated electric oven and your favorite powder.

Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle - from welders to paint and everything in between.

[thewatsonian]

Something rarely ever mentioned about powder coats is that once it’s cooled, it’s ready to go. Unlike paint which can take a day or two to harden up, you can take a brand new part, powder coat it and have it bolted up within an hour - start to finish.

[tedbastwock]

Thank you, I enjoyed watching all of Eastwood powder coating videos. Makes me glad to know that I can actually do it, and cant wait to try.

[rickykingi]

I recently got my fuel tanks powder coated on my truck they come up nice 👍

[GETVRHERE]

Seriously helpful. Answered all my questions.

[garrett]

super informative and directly to the point. thank you

[straightpipeproductions]

Sounds like a pro powdercoat video to me..

[David-yylb]

Good info but I bought and aftermarket ranch hand bumper and within a couple of years the paint faded and flaking off I don't know if it's automotive paint with clearcoat or powder coated?

[abdurrohim]

Info harga perlengkapan powder coating

[Birat]

Which one is best powder coating or spray paint

[LMB]

I have used weight stack gym machines that need refinishing. I would rather not disassemble the parts, nor transport the machines. What would be the best option to refinish them on site?

[abdurrohim]

Info harga perlengkapan powder coating