How To Fix Jammed Disc Brakes.

[lhnchuong]

Thank you, it works for me! Saved many hours if I viewed this first.

[souravparate]

I have been having this problem for years now and everyone knows service center doesn't help much with anything these days. Thankyou this has really helped.

[shivajigadgetstech]

बताने के लिए बहुत बहुत शुक्रिया, मेकैनिक पूरा डिस्क पैड बदलवने को बोल रहे थे, अपने मेरा खर्च बचा दिया 🙏🙏🙏🙏🙏🙏

[MhatsomoWYanthan]

It was really helpful. The service centre mechanics couldn't give time to fix this and this DIY really helped. Thanks. Keep it up bro!

[getmsinghal]

You are a savior and a great person. I have been watching your videos and you always have tricks or more shorter and cleaner way to solve problems. This suggestion worked like a charm. Job done in just few min. Everyone else was suggeting that the piston or caliper was jam and will need to be taken out to clean. Thank you sooo much ! You saved my day.

[ClaimOfRightMuso]

For anyone trying to follow this - probably very good video - but who, like me, doesn't speak the guy's language; I think what he's suggesting you do is simply to loosen-off the brake nipple causing a release of pressure (and therefore causing brake fluid to leak)? and this will result in a sudden self-repairing of the jammed caliper?
I don't know for sure if this is what's going on, but after messing-about, removing the caliper on my bike and then not knowing what-the-hell to do next and just re-assembling the caliper, I came to this video and tried what he did and it worked for me. Quite amazing - now don't go giving me a hard time if it doesn't work for you.


What I will say is this; I don't think applying the small hose is that significant, however it could be some sort of 'hack' to prevent air bubbles getting into the system - WHICH YOU DO NOT WANT - other than that, the little hose will prevent brake fluid spilling over your wheel.


If you're going to give this a go without the little hose but you're concerned about air getting into the system, just follow this process:
1. Loosen-off the nipple* then press the brake lever slowly until brake fluid come out of the nipple.
2. WHILE HOLDING THE LEVER IN, tighten-up the nipple again.
3. If no fluid comes out, repeat 1 and 2 until brake fluid does come out (make sure there's brake fluid in the little reservoir/Master cylinder on the handlebars)
*The guy in the video uses a brake nipple spanner/wrench, but I used just a size 8 ring spanner/wrench. If the brake nipple is in good condition (or not?) you'll most probably get-away with just using an ordinary spanner/wrench. DO NOT USE A BADLY FITTING SPANNER/WRENCH as you'll probably damage the nut.


DON'T FORGET TO FOLLOW STEPS 1 AND 2 CORRECTLY.


Thank you, GURUji - my front brake is okay again!

[AyushKumar-ksws]

Just faced this problem today on Delhi haridwar highway in my new xtreme 160. I panicked since it's my first bike. But fortunately got a mechanic nearby and he did the same.
I came on you tube for explanation and this video is really helpful.

[darshanpandya]

Very good information my bike got stuck in remote area & this helped me a lot !

[giyer]

Extremely useful video. Bahut acche. Ekdum sahi to the point. Thank you very much

[gopalbairagi]

भाऊ खूप खूप
माझ्या bike ला 2 वेळा हा प्रॉब्लेम आला होता तर गॅरेज ला फ्रंट व्हील सर्विस चे चार्ज लागले होते ....आता तुमचा विडिओ पाहून मी हा प्रॉब्लेम solve केला

[mr_kumar]

Yes Sir Yeh Work karta hai maine abhi aapki video dekhi aur turant ghar aaya bike double stand ki front wheel slide lock tha phir kya tha maine bike ke parts driver nikala aur try kiya it's truly amazing tips Thank You So Much Love From Guwahati Assam

[mdhur]

Thank you, aaj morning mei hi front tyre jaam ho gaya achanak, dimag fata, phone uthaya, YouTube pe video dekhi, niche gaya tool uthaya, ek pipe liya, aur theek kar diya😊 thank you again

[niranjanhulamudde]

This worked for me.... Thanks a lot. You deserve a subscribe for this 🎉

[mahendramhatre]

Its Awesome, I got the same problem and follow your steps and my jamm problem resolved, after loosing the point I had Tap little bit on Calliber part after that extra fuel come out and front wheel move smoothly

[sairajgoudmv]

You are awesome Bhai, merko bachaliya dhakka marke repair vale ke paas jaane se. Thankyou.

[Wolfgam]

I was trying to fix it like crazy. Thanks for the information.

[akbaralisherasia]

THANKS SAR AAP BAHOT ACHESE SHER KARTE HO

[RaviKumar-nukp]

Marvellous, fabulous, excellent, , knowledgeable, and self-help able video for everyone who keeps enthusiasm to learn and go ahead in one's precious life.God bless you.

[dnyneshwerbarde]

Thanks 😊😊🙏🙏 sir..just aapka... video dekhaa
Uskoo follow kiyaa....
Mere..bike kaa . break ekdum...free huaa.... thanks to .. advance....sir....
Thank ..Q..soo much
..
You are great sir...jii
Thanks 😊😊🙏🙏🙏🙏

[JDAngler]

Hi Friend Thank you so much for this beautiful technique. I did try this yesterday on my CBR 250R non abs version however after loosening the bleeder nut the brake oil started coming out and just didn't stop finally I had to remove the remaining as well from the master cylinder and top it up again. Could you plz tell me why all the oil started coming out instead of just the little.