Understanding Retrofit Windows and New Construction Windows Livermore CA

In this video we demonstrate the difference between new-construction and retrofit windows. We also explain how to properly install a retrofit window, and when to use a retrofit, or a new-construction window.

[kichansilva]

nice. im looking to get hired for sales specialist position at a hardware store. I have much knowledge about construction from working with my dad for over 15 years now but this helps brushing up a lot.

[loriallen]

This video was very informative. I like the silliness at the end. Thank you.

[ryry]

Very well explained! Thanks for the refresher ;)

[pieroroccaysj]

Watching the Pella video it would appear that you've missed a bunch of steps including flashing tape, several rounds of sealants, and shimming. Perhaps those were edited out.

[Watchoutforsnakez]

I love seeing things done properly. Ty I need help to replace my windows. I can’t live with the barking dog next door anymore. Sound sails right through these cheap aluminum windows my husband used. I hope I can do it

[satxpress]

Can I remove the window shims after the foam dries up. I want to foam where the shims where then replace the screws.

[jayliptak]

Why wouldn't you spec the job to pull the old outside trim and put the zbar behind it with caulking and flashing? This method seems to leave you with only one 1/4 inch hidden bead of caulk, vs two layers of protection.

[jessiehe]

If I want to replace with a retro-fit window, how should I measure the size of window?

[brianfethers]

That installation of the "new construction" widow in this video is abysmal. The flashing is a type archaic, it must have been sitting on a shelf in the shop. That type of flashing isn't even sold anymore (and for good reason). The window was set without sealant. The fasteners are not corrosion resistant, are not place in the prepunched holes and are too close to the corners of the window frame. Look up AAMA 2400 if you want to know how to install a window.

[jz]

And what about windows with no fins at all? Can’t find a video with a window nation type windows being installed

[damonf]

For the window with the wood trim, how is the measurement done when ordering the windows? Are you able to order a custom single wall flange size?

[josiehill]

Have questions. Looking to replace our windows in our Fl stucco home. But all I can find is examples of retro fit/ replacement windows for the western area which include the z bar frame which works with a window that sits flush with the outside wall. Ours does not. From my research I think ours is Deep recess with
beveled sides and stucco sill. Not sure that it qualifies for deep but it is recessed and beveled all the way around the window. So I really can't figure out what windows we need to be looking at . Its very confusing. Your video seems to make the most sense to me but I am not sure ours would work this way only due to the face that we have very narrow windows and very small amount of aluminum frame showing. We really wanted to replace them with some new aluminum windows rather than vinyl ones so thats another issue.
I would really Appreciate any help and info you can share with us on this.
I looked CWD  Windows up and you all have turned into the brand of window we have been looking at so that was a Big plus too. So really hoping you can help us out.
Our windows are something like 25x 72 approx. We have 5 this size then various other sizes around. Plus we have two windows that make a corner in the front  window to window so that is a whole other mess of questions needing to be asked .
Anyway I look forward to hearing back from you and Really Appreciate any help you can give us.
Also if you have a contact address or number would Appreciate that cause I have a feeling we are going to have lot of questions before we get started and during the process.
Oh by the way we are DIY-ers!
thanks
jm

[KhoaNguyen-oixd]

great video....one question. can a retrofit window be install in an new construction addition to match the rest of the existing retrofit windows around the house? I was informed by the inspector that I have to use a nail on for the addition. thanks

[michaelfreeman]

So retro-fit windows basically rely on the caulk to keep them dry.

[mrnoetiktok]

Thanks for the blopper's. I just started my own channel on Youtube man do I have a lot of bloppers.

'

So does this leave my 50 year old mold in the cracks or what? My windows are nasty around the border.

[Young-funny]

is somebody going to say something about that ghost in the window

[Sophia-ioqg]

What is this video misses is how your original window is in stalled will determine your satisfaction with a retrofit vs new install. If you existing widow is flush to near flush to the exterior wall a retrofit will be ok. If your existing window is flush to near flush to the interior will go with a new install it will be much more satisfying. I had both Skylanders in my house and I'm very unhappy with the windows that were near flush to the interior ball. This is something not covered by my installer, wish I'd sent the extra cash for new install. Also, take a good look at your current aluminum window frame, on many 50's-60's the sliding track is removable without damage to the frame as the slide tracks are screwed in. Removing these tracks allows for a larger window. Another thing missed by my Millgard approved installer!

[giverworshiptv]

Awesome.. but glass should been removed first for safety.

[PeterGlazewski]

what happens, i know, when the chalking fails