How To Fix A Servo

Rustlervxl09
5 Reasons to subscribe... READ!!!
_______________________________
#1 ITS 100% FREE!
#2 I NEED FEEDBACK!
#3 MY VIDEOS KEEP GETING BETTER!
#4 I TRY HARD TO SATISFY YOU!
#5 ONLY AMAZING PEOPLE DO IT!!!
______________________________
Rustler parts list(Godly moded)
Bumper(RPM)-$15
Bulkhead(REM)-$30
Fr Arms(RPM)-$10
Fr foams (Jaco)-$30
Chassis(REM)-$75
Upper chassis(Integy)-$20
Fr shocks (Bigbore)-$30
Fr hub carrier (Strc)-$20
All turnbuckle (Traxxas)-$20
All wheel hubs (Strc)-$15
Steering bell +crank(strc)-$25
Fr shock tower(REM)-$25
Servo(2075)(Traxxas)-$30
Servo horn(racers edge)-$5
Battery holdown(REM)-$10
10.8v batt(Max Amps)-$100
3s Lipo-(Maxamps)$170
All ball bearings(Bearings)-$15
Receiver+controller(Tqi)-$135
Rc sensors(Traxxas)-$50
Receiver case(Traxxas)-$10
Esc+motor(Velineon)-$165
Esc fan(Velineon)-$20
Rear shock tower(REM)-$25
Rear shocks (Bigbore)-$25
Rear arms(RPM)-$10
Driveshaft#11104(MIP)-$75
rear hub carriers(Strc)-$20
Rear paddles (Sling Shots)-$45
Rear foams (Jaco)-30
Rear badlands(proline)-$30
Front (dirthawgs 2.8)-30$
Transmission(REM)-$65
Gears(Traxxas/RR)-$25
Hinge pins(Strc)-$20
41tooth pinion(RR)-$10
76tooth spur (Integy)-$20
4mm tire bolts (Traxxas)-$5
3mm bolts (traxxas)-$5
Wheelie bar+wheels(Trax)-$25
Motor guard(rpm)-$10
stainless screws(Dynamite)$30
Orig body(Traxxas)-$30
Battery charger(Ez-Peak)-$100
-------------------------------
TOTAL PRICE OF MY TRAXXAS RUSTLER=$1695$
+ other $ wasted on Integy junk, failing parts and tryout parts...

[johnivers]

Thanks little buddy! This old man was stuck like chuck until I found your video. Much appreaction!!!

[adyfv]

Thanks for the video as it all fell to pieces when I opened it up and also spotted the problem will just by another but nice to see how it goes together thanks

[gamesystemchannel]

Thank you for showing me how to build servo

[kevinrcandgamess]

I use a lil small paint brush to get the grease between the gears

[yerralvargas-lopez]

good vid. i striped 2 teeth from 2 different gearsin a 2056 traxxas servo later on upgraded to the 2075 servo. keep up with the vids

[tootlepuff]

The 2075 doesn't run in snow for very long the plastic gears strip out after 4 runs.

[AERODADDYOFFICIAL]

You forgot the o-ring on the top bearings!

[bigbob]

Good vid, but you can buy pretty decent servos for around 20 bucks these days

[thebsssaucegaming]

can't get my stampede to turn when I try the servo engages and I can see the screw on the bottomed turn but not the white part connected to it...

[admiralstones]

How you tighten the bolt at the end matters as well

[rennv]

Forgot a few things, ...clean servo from all old grease, clean gasket and re install, reinstall o ring on servo gear.

[zargelayounselim]

I tried to do that but I just can not rotate the servomoterur in the opposite direction!! :/

[benchilds]

Just a heads up I found that same servo for $26.68 on amazon.

[mel]

How come you do not have the waterproofing seal on your top cover???

[giarlymoltubakk]

My servo stopped working for some reason😕 nothins broken though… dont know what to do! Plz leave an idea in this thread😕

[corbinail]

great video! i was crawling my summit and busted the gears on both servos and i bought this kit to fix it.

[brianu]

My servo was moving very slow. I took top off and looked for broken teeth. Nothing. I started moving the gears by hand when I noticed the bottom gear the large one and it was stuck. I could move it with flat head screwdriver but it was tuff. Sprayed wd40 and it freed up. Now works perfect. Hope this helps

[TechTiger]

Great tips, Is your summit a nitro car?

[patrickobrien]

You can buy a FeeTech FT5330M all metal servo for like $17 nowadays. Plastic is great if you bash 'em 24/7.

[rodneyjones]

the last one worked for two or three full turns .
an the receiver and transmitter are new