Error 0x800701E3 How to fix

⚠💻 Watch this video if you can't copy, delete, open files on your external hard drive…

When I try to copy a folder with many other folders within to an external on Windows, I get the following error 👇
Error 0x800701E: You could get this error when copying files to another drive or simply when you try to open a file.

Error 0x800701E: The request failed due to a fatal device hardware error. Device = External Hard Drive. Hence, it means there's something wrong (fatal error) with the hard drive.

📢 Please like & subscribe to help others find this video 🙏 If you have any questions, please let me know in the comments below? 😊
More related videos below 👇

📢 2 ways to support my channel 👇
2) Become a member 👉

Windows managed to copy a few files. Can't even delete the folder that was partially copied! You don't need to scan this drive. It's a very misleading message! It's a fatal error because Windows is unable to scan the drive! You only would get the "Scan and repair drive" option after Scanning the drive first. You shouldn't use the drive when Windows is scanning it. In your case, after clicking on "Scan and repair drive", your drive might get fixed. But, if your drive is still not fixed, then continue watching for other solutions. Test whether your existing files inside that drive are working! One of the causes that could've damaged the hard drive is when you unplug the drive without safely ejecting it first. Physically unplug the external hard drive. Wait a few minutes. If your external hard drive is connected to an external power source, then unplug the power cable too. Connect back the external hard drive. Good news, you might be able to again open the files that had an error. IMPORTANT: This is not the final solution, please continue watching to 100% repair your hard drive. Again, this misleading message! This time, Windows was able to scan the drive! NOTE: Don't use your computer while Windows tries to fix the drive. Depending on the extend of the error, drive capacity, used space, etc., it might take a while. It took me less than 5 minutes.

If in your case, Windows is still unable to fix your drive, then jump to 5:50 , where I'd share a few more tips to try. Test 1: open a few files. Test 2: Delete the folder that was partially copied. Test 3: copy the same folder that caused the error. Checking that all the files are copied. Test 4: open the copied files.

Remove the drive and leave it unplugged for few minutes. Plug into another USB port.

#BhupinderTube #windows #tutorial

[bhupindertube]

📢 Please like & subscribe to help others find this video 🙏 If you have any questions, please let me know in the comments below? 😊
More related videos below 👇

[yeeeeeeeboi]

This worked greatly and flawlessly, thank you so much!

[segelgazeta]

Very clear and detailed explanation! I solved a problem that I’ve been experiencing for almost a year. Thank you

[rafaelmotos]

Many thanks, I followed your instructions and my External HD came back alive...

[Alex..]

Hola, tenía el error 0x80070570 en una partición de mi disco que no es el C: del sistema. Y pues le di en propiedas de particion y a analizar y reparar, el compu se reinicio pero no volvió a la pantalla de iniciar sesión, solo me muestra la marca de la placa base y con letras "examinado y reparando unidad (d:)..." pero no me da un porcentaje, luego la pantalla se apaga por un segundo y gira la ruedita y vueleve aparecer ese texto abajito en un cuadro negro. Lleva en es bucle más de 7 minutos. No se que hacer para iniciar mi windows de manera normal. Ya intente desconectar el disco duro, dejando el ssd que es el que tiene el sistema y de una vez me manda al setup como si no pudiera arrancar sin tener conectados los 2 discos. Puedo contactarte por otro lado para enviarte fotos?

[mtrobming]

Liked AND Subscribed thank you this was so helpful

[frozentube]

I just bought a new ssd and faced the same issue, immediately got a heart attack, this method did not work for me, what worked for me was I plugged the ssd in a different sata port on the mother board and after turning on the computer it is working well, maybe clean your sata cable or sata ports on the mother board or plug it to a different port if you have multiple ports

[loppw]

I had the same error, but apparently it was only in one folder. I couldn't solve it, I'm going to buy another disk anyway.

[citybasket]

thank you my friend you will get a like from me...

[carrot-sama]

i cant safely eject my hard drive
can you help me?

[MNGman]

There's some commands u can type on the command prompt to delete the files permanently but I'm not sharing that comment 😂