How To Drill A Straight Hole Without A Drill Press

How To Drill A Straight Hole Without A Drill Press:
How To Drill A Straight Hole Without A Drill Press with basic materials and tools to more accurately make perpendicular holes.
------------------------------
Flash by Chris Henry @chrislehmannproducer
------------------------------
WARNING:
This video for entertainment purposes only. If you use information shown in this video or attempt to repeat anything in part or whole, you do so at your own risk. Remember your safety is your responsibility.
------------------------------
BREAK IT TIL YOU MAKE IT!

Thank you!

[swany]

Finally! I found the guy that does the voice for all those videos. Here I thought it was a computer generated voice.

[millylitre]

I use a small plastic mirror, with a clearance hole drilled through the centre. Place mirror on workpiece. Drill workpiece through the hole! If drill is not perpendicular then drill and its reflection will look bent. Just line up the drill with its own reflection and then start drilling.

[shantayprueeissen]

If you want to know how to make it yourself, just look for woodprix.

[SomeRandomPerson]

Finaly someone advice how to make jig for straight drilling without drill press

[TheCyberHippie]

I use a drill guide to make a hole in a short piece of 2x2 scrap and use that as my portable jig. The drill guide also lets you drill at angles to make angle drilling jigs that can be clamped to your work for cutting pocket holes and the like.

[l.n.]

My gosh the black apron and the black gloves, he looks like those guys in the Hostel movies about to hack some poor bloke lol

[SalsaChips]

or you could just use a drill press to make the jig and use the jig to not have to use a drill press.

[yorambernet]

That's a pretty nice solution when the required hole is shallow relative to the length of the drill bit. But - what do you recommend if the hole depth is comparable to the length of the bit?

[meme]

You're making a tool to make your holes perfect without making the tool perfect... MADNESS!

[tobymonger]

Wouldn't the bit bore the hole out as you used it?

[sarahbearbabygirl]

this helps SO much. i feel like so many woodworking tutorials ask you to acquire a ton of expensive and large pieces of equipment, both of which i can’t house in my small 2 bed apartment. but this is so reasonable and works so well.

[kevinjones]

Brother, that is brilliant! Thank you so much for sharing.

[andreasjohns]

They make accurate jigs for less than $10. And why the multi- layered pieces glued together instead of one piece of wood???

[VOLT]

Thanks for the idea. I'd prefer if you dropped the background music.

[benzflynn]

Good idea. Fast to make and no great expense.
Superglue for wood ? I'd have thought it would need so much surface priming you'd be robbed !

[chewar]

Background music is super annoying, couldn't even watch the video.

[arkkupitkanen]

It is very impossible to drill curved hole. ''How To Drill A Straight Hole''

[felgate]

Could have used Metal Tube in the Build for the first hole size & inserted other close fitting tubes for smaller sized holes (reducing the number of Jigs you'd have make) OK, quite limited given tube sizes available, but should be good for 2 or 3 other sizes ??

[michealgillman]

What a waste of time. Just get someone with a drill press to drill a accurate hole through any piece of timber and use that as a guild...why cut a glue multiple pieces together??

[mattandrews]

Yeeeaaahhh ima just go buy that $80 drill press off of Amazon 😂 ✌️